WAREMA Mobile System® WMS Central transmitter

System9.1.3 SettingsThis menu gives you access to all actuator parameters.CAUTIOChange the safety-related parameters (e.g. wind speed limit) only if you havethe knowledge necessary to do so and have been trained in the specialfeatures of the particular sun shading product you are using. Incorrect limitvalues can result in damage to the sun shading product.NOTEThe parameters are charged directly from the actuators. Some of the displayedparameters may vary with the type of actuators and product type.The parameters displayed in this chapter relate to the example of an externalvenetian blind.The [Settings] menu with its submenus is displayed as follows.Main menu System Products Product type Channel x SettingsbuttonAction/resultIn the main menu, select the [System] menu and press ok.The [System] menu opens.Select the [Products] menu here and press ok.The [Select product type] menu opens.Using the selection cursor, select the product type of thedesired channel.Press the ok button.All channels of the selected product type are displayed.Using the selection cursor, select the desired channel.Press the ok button.The context menu for the selected channel is displayed.890405_0•en•01.11.2009 We reserve the right to carry out improvements 81