WAREMA Mobile System® WMS Central transmitter

System9.1 ProductsNOTEVia the [Products] menu, you can display and edit the parameters of the actuatorsthat have been learned in.The parameters are charged directly from the actuators. Some of the displayedparameters may vary with the type of actuators and product type.The parameters displayed in this chapter relate to the example of an externalvenetian blind.9.1.1 Managing channels9.1.1.1 Renaming a channelThe channels into which actuators have been learned can be renamed. Ifneeded, you can call up details on the actuators of the channels.To rename a channel, proceed as follows:Main menu System Products Product type Change channel nameButtonAction/resultIn the main menu, select the [System] menu and press ok.The [System] menu opens.Select the [Products] menu here and press ok.The [Select product type] menu opens.Using the selection cursor, select the product type of thechannel that you wish to rename.Press the ok button.All channels of the selected product type are displayed.Using the selection cursor, select the channel you wish torename.890405_0•en•01.11.2009 We reserve the right to carry out improvements 77