WAREMA Mobile System® WMS Central transmitter

ProductsWAREMAWMS Central transmitter8.1.2 Operating a product bypreselecting the positionThe position is preset. The product does not move to the set value until thevalue is enabled.Main menu Products Product type ChannelbuttonAction/resultIn the main menu, press the function button repeatedly untilthe selection cursor is on the [Products] line.Press the ok button.The [Select product type] menu opens.Using the function buttons, select the product type that youwould like to operate.Press the ok button.All channels of this type are displayed.Using the function buttons, select the channel that you wouldlike to operate.Press the ok button.All parameters of this channel are displayed. In the exampleshown here of the external venetian blind, the position andslat angle can be changed.Use the selection cursor to select a line whose entry youwish to change (in the example: slat angle).Use the arrow buttons on the right to adjust the parameter tothe desired valueConfirm the changed value with OK.The new value is now sent to the actuator and the product ispositioned accordingly.The status display indicates the transmission process:GREEN: The central transmitter is transmittingRED: The command is not confirmed (e.g. the receiver isoutside of the transmission range)60We reserve the right to carry out improvements890405_0•en•01.11.2009