WAREMA Mobile System® WMS Central transmitter

Products8.1 Operating theproducts8.1.1 Operating a productdirectlyTo operate a product (a channel) with the WMS Central transmitter, severaloptions are available to you. You can operate the product directly, preselectpositions or recall a scene.The product responds directly to the press of a button on the WMS Centraltransmitter.Main menu Products Product typeButtonAction/resultIn the main menu, press the function button repeatedly untilthe selection cursor is on the [Products] line.Press the ok button.The [Select product type] menu opens.Using the function buttons, select the product type that youwould like to operate.Press the ok button.All products of this type are displayed.The buttons that are relevant to the particular product areactivated on the right.Operate the product using the function buttons. In the followingexample, the product is an external venetian blind:Short: The slats tilt upLong: The product moves upThe product stopsShort: The slats tilt downLong: The product moves downShort: The product moves to the stored comfort positionLong: The comfort position for the product is storedNOTE A detailed overview of the operating functionsof the various product types can be found inChapter 4.3 on page 20.The status display indicates the transmission after everyoperating step:GREEN: The central transmitter is transmittingRED: The command is not confirmed (e.g. the receiver isoutside of the transmission range)890405_0•en•01.11.2009 We reserve the right to carry out improvements 59