WAREMA Mobile System® WMS Central transmitter

Favourites7.1.3 Operating products byrecalling a sceneScenes can be used to jointly operate a large number of different products atthe press of a button. The position or activation state of the products involvedis stored and is then brought about again when the scene is recalled.To recall a scene:Main menu Favourites Channel xbuttonAction/resultIn the main menu, select the [Favourites] line using theselection cursor.Press the ok button.The [Favourites] menu opens.Use the function buttons to select the desired scene.NOTE If the desired scene was assigned to a favourite, firstselect this favourite. You can then select the scene inthe submenu of the favourite in the next step.Press the button briefly.All products involved in the scene move to their stored positions.The status display indicates the transmission process:GREEN: The central transmitter is transmittingRED: The command is not confirmed (e.g. the receiver isoutside of the transmission range)To change a scene:Move the products involved in the scene to the desired positions.Press the button until the status display shows the transmissionprocess.The scene is stored again.890405_0•en•01.11.2009 We reserve the right to carry out improvements 43