WAREMA Mobile System® WMS Central transmitter

Getting startedWAREMAWMS Central transmitter6.5.3 Operating products byrecalling scenesScenes can be used to jointly operate a large number of different products atthe press of a button. The position or activation state of the products involvedis stored and is then brought about again when the scene is recalled.To recall a scene:Main menu Products ScenesbuttonAction/resultIn the main menu, press the function button repeatedly untilthe selection cursor is on the [Products] line.Press the ok button.The [Select product type] menu opens.Using the function buttons, select [Scenes].Press the ok button.All stored scenes are displayed.Using the function buttons, select the scene that you wouldlike to recall.Press the button briefly.All products involved in the scene move to their stored positions.The status display indicates the transmission process:GREEN: The central transmitter is transmittingRED: The command is not confirmed (e.g. the receiver isoutside of the transmission range)To change a scene:Move the products involved in the scene to the desired positions.Press the button until the status display shows the transmissionprocess.The scene is stored again.38We reserve the right to carry out improvements890405_0•en•01.11.2009