WAREMA Mobile System® WMS Central transmitter

Getting started6.3 Example for operation:Set time and dateSetting of the date and time is used here to demonstrate how the values ofthe WMS Central transmitter can be set and changed with the function buttons(the following date and time displays are examples and may differ fromthe display on your WMS Central transmitter):Main menu System Settings Date/timeButtonAction/resultIn the main menu, press the function button repeatedly untilthe selection cursor is on the [System] line.Press the ok button.The [System] menu opens.Press the function button again until the selection cursor ison the [Settings] line.Press the ok button.The [Date/time] menu opens:Select the [Date/time] line using the function button.Press the ok button.The [Date/time] menu is displayed. The top menu line,[Time], is selected.Use the function buttons to set the desired time.Press the button briefly: The value changes slowly.Press and hold the button: The value changes rapidly.NOTE Use the button to load the standard value of aparameter.Use the button to cancel your entry; the valuestored last is displayed again.After entering the time, change to the [Day] line with the functionbutton.NOTE When you leave a menu line, the value displayed thereis automatically adopted..Use the function buttons to set the current day.Repeat these steps for [Month] and [Year].- The [Weekday] is automatically calculated from the date. Thesymbol indicates that the value cannot be set manually.890405_0•en•01.11.2009 We reserve the right to carry out improvements 33