WAREMA Mobile System® WMS Central transmitter

IntroductionWAREMAWMS Central transmitter4.3 Operating theproductsNOTEThe product type determines the available functionality when operating theproduct connected to the WMS Plug receiver. It is specified when learningthe plug receiver into a WMS transmitter.Once the product type has been selected, it can no longer be changed directly.To program a WMS Plug receiver for another product type, the receivermust be deleted out of the network entirely and learned in again.CAUTIOWhen learning in, it is important that you select the product type of theconnected product. Selection of the wrong product type can lead tomalfunctions and may result in damage to the connected product.Product typeExternal venetianblindInside venetian blindInside vertical louvreblindRoller shutterInside pleated blindInside roller blindAwningAwning with integr.wind sensorConservatoryawningFacade awningDrop-arm awningFunctionalityShort: The slats tilt upLong: The product moves upThe product stopsShort: The slats tilt downLong: The product moves downShort: The product moves to the stored comfortpositionLong: The comfort position for the product isstoredThe product moves upThe product stopsThe product moves downShort: The product moves to the stored comfortpositionLong: The comfort position for the product isstoredAwning without valance roller blind driveThe product moves up/retractsor arrow button in opposite direction:The product stopsThe product moves down/extendsShort: The product moves to the stored comfortpositionLong: The comfort position for the product isstoredNOTE The STOP button also deactivates the windevaluation for one minute.Vertical awningMarkisolette20We reserve the right to carry out improvements890405_0•en•01.11.2009