WAREMA Mobile System® WMS Central transmitter

Introduction4.2.2 Product type displaysThe various product types that can be controlled with the WMS Centraltransmitter are defined when the products are learned in. The product typedetermines which control options are available for that product. The producttypes are displayed graphically in the menus.At this time, the following product types can controlled with the WMS Centraltransmitter:SymbolProduct typeSymbolProduct typeExternal venetianblindMarkisoletteVenetian blind, insidePleated blind, insideRoller shutterRoller blind, insideAwningVertical louvre blind,internalAwning with valanceroller blindWindowAwning with integratedwind sensorAwning with valanceroller blind & integratedwind sensorSwitch lightSwitch loadConservatory awningDim lightFacade awningDim loadDrop-arm awningVertical awningAwning 2 valanceroller blindsAwning 2 valanceroller blinds & integratedwind sensorFig. 8Product type displayNOTERemarks:This product type only appears for WMS Plug receivers configured at the factoryfor this application. The selection is skipped during the learning procedurebecause the product type cannot be changed.This product type is only displayed for WMS products with the correspondingfunctionalityWhen learning in a WMS device, you can only select those product typesthat this device supports (for example, the WMS Plug receiver cannot belearned in with "Switch power socket").890405_0•en•01.11.2009 We reserve the right to carry out improvements 19