WAREMA Mobile System® WMS Central transmitter

System9.3.2 Setting the date and timeTo be able to use the functions that require the date and time (e.g. timeswitch), these parameters must be set to the correct values.Main menu System Settings Date/timeButtonAction/resultIn the main menu, press the function button repeatedly untilthe selection cursor is on the [System] line.Press the ok button.The [System] menu opens.Press the function button again until the selection cursor ison the [Settings] line.Press the ok button.The [Date/time] menu opens:Select the [Date/time] line using the function button.Press the ok button.The [Date/time] menu is displayed. The top menu line,[Time], is selected.Use the function buttons to set the desired time.Press the button briefly: The value changes slowly.Press and hold the button: The value changes rapidly.NOTE The button can be used to load the default valueof a parameter.The button can be used to reverse the entry; thevalue stored last is displayed again.After entering the time, change to the [Day] line with the functionbutton.NOTE When you leave a menu line, the value displayed thereis automatically adopted..Use the function buttons to set the current day.Repeat these steps for [Month] and [Year].- The [Weekday] is automatically calculated from the date. Thesymbol indicates that the value cannot be set manually.890405_0•en•01.11.2009 We reserve the right to carry out improvements 113