WAREMA Mobile System® WMS Central transmitter
WAREMA Mobile System® WMS Central transmitter
WAREMA Mobile System® WMS Central transmitter
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
System<strong>WAREMA</strong><strong>WMS</strong> <strong>Central</strong> <strong>transmitter</strong>9.2.6 Changing the radiochannelNOTEYou can change the radio channel of all active network devices. This maybecome necessary if, for example, other <strong>transmitter</strong>s interfere with the communicationof the <strong>WMS</strong> products.The channel can be set from 11 to 26 (factory setting is 17).To be able to change the channel of a network, the devices must be active.This means that all network devices must be woken up. You can wake up thenetwork devices one after the other and send the command as often as youlike.To change the radio channel, proceed as follows:Main menu System Commissioning Change radio channelbuttonAction/resultIn the main menu, select the [System] menu and press ok.The [System] menu opens.Select the [Commissioning] menu here and press ok.The [Commissioning] menu opens.Using the selection cursor, select the[Change radio channel] menu item.Call up the function with ok.The following menu is displayed.Using the selection cursor, select the desired radio channel.The following message appears.110We reserve the right to carry out improvements890405_0•en•01.11.2009
Change language