WAREMA Mobile System® WMS Central transmitter

System9.2.3 Learning out actuators/sensors with the serialnumberNOTEIf you know the serial number of the device, you can delete it from the networkdirectly by entering the serial number.This function is particularly useful if a device is faulty and cannot respondduring scanning. It is also possible to delete sensors out of a network in thismanner without first having to wake them up.Proceed as follows to learn out actuators and sensors.Main menu System Commissioning Learn in/out actuators/sensors with serialnumberButtonAction/resultIn the main menu, select the [System] menu and press ok.The [System] menu opens.Select the [Commissioning] menu here and press ok.The [Commissioning] menu opens.Using the selection cursor, select the[Learn out actuators/sensors with serial number]menu item.Call up the function with ok.The following menu is displayed.Enter the serial number of the device.(For entering texts, see also Chapter 6.4 on page 35).890405_0•en•01.11.2009 We reserve the right to carry out improvements 105