WAREMA Mobile System® WMS Central transmitter

Safety instructionsWAREMAWMS Central transmitter2.3 Target groupThese instructions are addressed to persons operating, adjusting or commissioningthe control unit.WARNINCommissioning or operation by insufficiently qualified and knowledgeablepersons may cause serious damage to the system or may even result inpersonal injury.Commissioning may therefore only be performed by properly trained andqualified specialists. These specialists must be able to recognise sources ofdanger that may be caused by the mechanical, electrical or electronic equipment.These qualified specialists must know and understand the content of thepresent instructions and the instructions of the individual WMS products.2.4 Retrofitting andmodificationsWe design and build the WMS products with reliability and safety in mind. Allrequired settings are made when the unit is first commissioned. Modificationof the unit parameters is therefore only required when the characteristics ofthe control need to be adjusted, changes are made to the sensor equipmentor the control itself is replaced.WARNINRetrofitting and modifications may impact the safety of the system orreduce its effectiveness. Possible consequences may include death,serious or light injuries, property or environmental damage.Therefore, contact us or your specialist dealer before retrofitting or changingthe system or the unit parameters if you cannot find information on the correspondingtopic in the control unit documentation. This is the only way toensure trouble-free retrofitting/modification.Exercise special care when components of different versions are combinedor when existing components are replaced by older/newer products with adifferent scope of functions or a different software version.10We reserve the right to carry out improvements890405_0•en•01.11.2009