RMax Wall Insulation Brochure - BlueLinx

R-MATTE ® PLUS - /DURASHEATH ® -IN FRAME WALL CONSTRUCTIONR-MATTE ® PLUS - /DURASHEATH ® -IN FRAME WALL CONSTRUCTIONR-MATTE ® PLUS - : This versatilemulti-application product is used withthe reflective foil facer to the exteriorin brick cavity wall applications and thewhite matte facer to the exterior whensiding is applied over it. R-Matte Pluscanbe applied to the interior or exteriorface of masonry walls.DURASHEATH ® - : An advancedsheathing product with fiberglassmat facers, specially engineered fordurability on the job. For use inframe wall construction.THERMASHEATH ® - : Our standardfoil-faced product for use in frameconstruction, cavity wall, vaulted ceilingconstruction, interior or exterior ofmasonry walls, a variety of roof applicationsand in retrofit applications.TSX-8500 SERIES FOR EXPOSEDAPPLICATIONS: An excellent choicefor pre-engineered metal buildings,pole buildings, agriculture and coldstorage applications.STANDING SEAM METAL ROOF WITH RMAX ®NAILABLE BASE -ASPHALT SHINGLES WITH RMAX ® VENTEDNAILABLE BASE -RoofingUnderlaymentAsphaltShinglesStanding SeamMetal RoofSeparation SheetRMAX ® NAILABLE BASE -F.M.-approved ScrewsMetal orWood DeckRafters orMetal JoistsAirflowAirflowAirflowWood or Metal DeckFasciaBoardRMAX ® VENTED NAILABLE BASE -

THERMASHEATH ® - /R-MATTE ® PLUS -IN BRICK CAVITY WALL CONSTRUCTIONTHERMASHEATH ® - /R-MATTE ®PLUS - IN INTERIOR BLOCKWALL CONSTRUCTIONTSX-8500 IN POST FRAME AND METALBUILDING CONSTRUCTIONNAILABLE BASE - : Suitable for standing seam metal,clay tile and slate roofing applications.VENTED NAILABLE BASE - : Prevents heat build-upunder roofs. An excellent choice for asphalt shinglesand vaulted or cathedral ceilings. Meets manufacturers’warranties requiring ventilation.MULTI-VENT NAILABLE BASE - : A superiorchoice anywhere shingle manufacturers’warranties require ventilation of the roofsystem. Rmax’s wood blocks are configuredto allow air flow in any direction and arespaced no more than 12" apart.ASPHALT SHINGLES WITH RMAX ®MULTI-VENT NAILABLE BASE -Nominal Thickness5".75"1.0"1.5"2.0"2.5"3.0"3.5"4.0"4.5"Thermal R-ValueRmatte Plus Thermasheath/TSX-8500 Nailable Base3.25.05.99.412.916.419.923.326.830.36.79.712.816.019.222.425.7"R" means resistance to heat flow.The higher the R-Value, the greater the insulating power.Thermal values are determined by using ASTM C518 test method at 75 degree F mean temperature on materialconditioned according to PIMA Technical Bulletin No. 101.

AND USAGE OF TRADE, AND ANY AND ALL LIABILITY WITH RESPECT TO THEPRODUCT OR SERVICES PERFORMED OR PROVIDED BY RMAX. THE WARRANTIESEXPRESSED HEREIN ARE EXCLUSIVE AND ARE GIVEN IN LIEU OF (i) ANY AND ALLOTHER WARRANTIES EXPRESS OR IMPLIED, AND (ii) ANY OBLIGATION LIABILITY,RIGHT, CLAIM OR REMEDY, IN CONTRACT, TORT OR STRICT LIABILITY, WHETHEROR NOT ARISING FROM NEGLIGENCE, ACTUAL OR IMPUTED. THE WARRANTIESEXPRESSED HEREIN SHALL BE THE EXCLUSIVE REMEDY FOR A DEFECT IN/OR DAM-AGES RELATED TO THE PRODUCT.General Conditions and PrecautionsMaterial Handling: Rmax insulation is shipped in plastic wrappedbundles approximately 48 inches high. These wrapping materials are notadequate for weather protection of the insulation. Bundles shall be stackedon pallets or other materials to keep them up off the ground and be coveredby a tarpaulin or suitable “breathable” protective cover. DO NOT use wetinsulation products in any application. Installation of wet insulation or otherbuilding components shall cause the Rmax warranties to become void. Rmaxinsulation that has become wet may be applied after it is allowed to thoroughlydry. All other building materials shall be stored as recommended bythose manufacturers.Vapor Retarders: Vapor Retarders are recommended by Rmax forbuildings where the average mean temperature in January will be 40˚F orlower, or when the occupancy of the building is such that the relativehumidity of the interior will be 45% or greater. The decision to use a vaporretarder and the selection of the details of the retarder construction is leftto the building architect, designer, building owner or their designatedrepresentative or agent.Typical Physical Properties 1Property Test Method ResultsCompressive Strength ASTM D 1621 > 16 psiFlame Spread, Core 2 ASTM E 84 35 or LessSmoke Developed, Core 2 ASTM E84 75-160Water Vapor Transmission ASTM E96 < 1 PermWater Absorption ASTM C209 < 1% Vol.Dimensional Stability ASTM D 2126 < 2% Linear Change7 days, 158˚F, 95% rhService Temperature –––––––––– -40˚ to +250˚FNotes:1Physical properties shown are based on data obtained under controlled conditions and are subject tonormal manufacturing tolerances.2Flame Spread and Smoke Developed Indexes are used to measure and describe the properties of thismaterial in response to heat and flame under controlled laboratory conditions and should not be used todescribe or appraise the fire hazard or fire risk of this material and other related roofing componentsunder actual fire conditions.Limited Warranty: Notwithstanding anything herein to the contrary, Rmax makes norepresentation or warranties whatsoever concerning the Product, except that the Productwas manufactured in accordance with specifications set forth in ASTM C1289, at the timeof purchase is free from any lien or encumbrance, and, for a period of one (1) year fromthe date of delivery of the Product, is free from defect in materials and workmanship.BUYER ACKNOWLEDGES AND AGREES THAT, EXCEPT AS PROVIDED ABOVE, THEPRODUCT IS BEING DELIVERED IN AN “AS IS, WHERE IS” CONDITION, AND WITHALL FAULTS, Rmax, HEREBY DISCLAIMS, AND BUYER HERBY WAIVES, ANY AND ALLOBLIGATIONS AND LIABILITIES OF RMAX AND RIGHTS, CLAIMS, AND REMEDIES OFBUYER AGAINST RMAX, WHETHER EXPRESS OR IMPLIED, AND WHETHER ARISINGBY LAW OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, IMPLIED WAR-RANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IMPLIEDWARRANTIES ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING,Limitation of Liability and Buyer’s Remedies: IN THE EVENT OF A DEFECT]IN THE PRODUCT COVERED BY THE LIMITED WARRANTY SET FORTH ABOVE,RMAX SHALL AT RMAX’S OPTION AND EXPENSE, REPAIR OR REPLACE THEDEFECTIVE PRODUCT, OR REFUND THE AMOUNT PAID BY THE BUYER FOR THEDEFECTIVE PRODUCT. WITHOUT LIMITATION THE FOREGOING, Rmax SHALL NOTBE LIABLE FOR BUYER’S LOSS SPECIAL, OR CONSEQUENTIAL DAMAGES OR ANYKIND, AND BUYER HEREBY WAVES ANY RIGHT IT MAY HAVE TO SUCH DAMAGES.This LIMITED WARRANTY shall not be applicable to defects or damages which, uponinspection by Rmax are determined by Rmax to be caused by any of the following:a) Normal wear and tear.b) Intentional vandalism or abuse, or negligent use, misuse or abuse (includingany usage not in accordance with the product instructions).c) Accident or natural disasters, including but not limited to, fire, flood, lightning,earthquake, tornadoes, hail, hurricanes, wind storms or Acts of God; ord) Improper handling, storage, application or design, structural movement,or maintenance.Claims against Rmax under the provisions of this LIMITED WARRANTY must be madewithin thirty (30) days after the alleged defect to which the claim related is discoveredor should have been discovered, by written notice to Rmax at the following address:13524 Welch Road; Dallas, Texas 75244; Attention – Technical Services. The writtennotice must be accompanied by the dated invoice or receipt received by the Buyer atthe time of purchase. Rmax shall have sixty (60) days from receipt of such notice toinspect and analyze the alleged defective material. Under no circumstances shall thematerial to be disposed or to be returned to Rmax unless the Buyer has receivedwritten instructions to do so. Buyer shall have no right to deduct the amount of anyclaim from Rmax’s invoice until the claim is allowed or adjusted. Failure on the part ofthe Buyer to follow these provisions shall waive all rights under this LIMITEDWARRANTY. Unless modified in writing, signed by both Rmax and Buyer, thisLIMITED WARRANTY is understood to be the complete and exclusive agreementbetween the parties, and supercedes all prior agreements, oral or written, andall other communications between the parties relating to the subject matter ofthis LIMITED WARRANTY. Some states and certain federal laws do not allow certainlimitations or implied warranties, so such limitations or exclusion may not apply to you.In addition, some states do not allow the exclusion or limitation of incidental orconsequential damages, so such limitation or exclusion may not apply to you. Thiswarranty gives you specific legal rights, and you may also have other rights which varyfrom state to state.Refer to SALES POLICY included with the other Rmax literature for other terms andconditions relating to the state of Rmax insulation products not contained herein.General Conditions: Descriptions, specifications and recommendations describedherein are subject to change without notice. Consult with Rmax Sales for the latestinformation. The design and construction of the roof deck and supporting structure arethe responsibility of the project architect, engineer, general contractor and the buildingowner. The selection and use of Rmax insulation and other roofing system componentsto meet the requirements for a project is at the sole discretion of the owner or hisdesignated agent or representative.No warranty, expressed or implied, as to characteristics, physical properties, orperformance under any variations from controlled conditions at time of manufacture ismade. These provisions may not be altered in any way by a salesperson, employee,agent, or any other representative of Rmax, except by a letter from an officer of Rmax.Rmax does not assume any responsibility or liability for the performance of anyproducts other than those manufactured by Rmax.General Provisions: This document with all attachments constitutes the entireagreement between Rmax and the Buyer and is intended as a final, complete andexclusive expression of the agreement. This agreement supersedes all priorrepresentations, understandings and agreements. Any failure on the part of Rmax toinsist upon the performance of any term herein shall not be construed as a waiver orrelinquishment of Rmax’s right to such performance and Buyer’sobligation shall continue in full force and effect.Choice of Law: This agreement shall be governed and construed in accordance withthe laws of the State of Texas.WARNING: Polyisocyanurate is an organic material which will burn when exposedto an ignition source or sufficient heat and intensity, and may contribute toflames spreading.Rmax Sales Office and Plant LocationsE-mail us at rmax@rmaxinc.com or visit our website www.rmaxinc.comCentral Division: Eastern Division: Western Division: Member of:13524 Welch Road 1649 South Batesville Road 210 Lyon DriveDallas, Texas 75244-5291 Greer, South Carolina 29650 Fernley, Nevada 89408Phone: 972-387-4500 Phone: 864-297-1382 Phone: 775-575-4849Fax: 972-387-4673 Fax: 864-234-7548 Fax: 775-575-5035PIMAPolyisocyanurateInsulation ManufacturersAssociationToll Free: 1-800-527-0890 Toll Free: 1-800-845-4455 Toll Free: 1-800-762-9462 301-654-0000www.polyiso.orgAs a partner in the ENERGYSTAR ® Insulation Program,Rmax is working with the U.S.Environmental ProtectionAgency (EPA) and the U.S.Department of Energy (DOE)to educate homeowners aboutthe benefits of addinginsulation to their homes.RSS03 - 9/08Printed in the U.S.A