BAL4010/4020_English v.2.8 - Hydrotechnik

2. Programming of syntaxand unit of measurement* * * * PROG * * * *1-> Unit/ Language2-> Date3-> Clockunit language*1-> SI * 3-> Germ.2-> US 4-> Engl.5-> FrenchThe stroke of key and key causes thismenu to appear.To select the unit/syntax you have to press key 1.You can choose between SI- and US-units.The SI-units are for example bar, °C, l/min., etc..After the switch-over to US-units, the usual units likepsi, °F, gal/min. are used.The languages German, English and French can be selected,the selection must be confirmed with key ENT. The star marksthe actual selection.2.1 Addition to Multi-Test 4020,programmming of date and time* * PROG DATE * *19/06/95ENT-> confirmWith key 2 the menu "Prog. date" is invoked, into which you canenter the actual date, always with two digits: day-month-year.* PROG Clock *11 : 16ENT-> confirmWith key 3 the menu "Prog. time" is invoked, into which you canenter the actual time, always with two digits: hours-minutes.When pressing key "ENT" after this, the clock isstarted. The clock can be adjusted exactly by puttingit forward by one minute and starting it with key"ENT", whilst comparing it with another exact clock.-7-