DSP56xxx C Cross-Compiler User's Guide - Tasking

Run–time Environment 7–5tableFmainmain()F_exitexit()cstart.incMacroNODSTACKNOESTACKNOCACHENOCOPYNOARGVPLLVALUE=valBCRVALUE=valLOW_DYNAMICNARROW_BUSUSP=R6DescriptionDo NOT initialize the dynamic stack pointer(only in static model for the DSP5600x).Do NOT initialize stack extension hardware(DSP563xx only).Do NOT enable cache (DSP563xx only).Do NOT produce code to clear BSS sections andinitialize DATA sections.Do NOT produce code to provide a dummy argumentvector to function main().Set clock phase locked loop register to val. If notdefined, the PLL is not initialized.Set external memory waitstates to val. If not defined,zero wait states is selected for all memory(not on DSP563xx).Select 16–bit arithmetic mode (DSP563xx only).Select 16–bit address bus mode (DSP563xx only).Select register R6 for user stack pointer.cstart.inc• • • • • • • •