CHAPTER 8 - Border Roads Organisation

- 3 -(iii) Major Assemblies Pool. Major assemblies may be indented to theextent of the following existing proportion at the discretion of HQ DGBR.(aa) Petrol Engines for vehicles - 10 %(bb) Diesel Engines for vehicles - 10 %(cc) Diesel Engine for all Equipment - 10 %(b) Repeat Buy Equipment. No initial spares to be purchased as given in Para 3(b) above.8.6. Quantum to be Covered in the Indent of Initial Spares in Respect of ImportedEquipment. The quantum of spares be covered in the indent of initial spares for the importedequipment is as under :-(a)First Time Buy Equipments(i)Maintenance Spares-Requirement of spares for 24 months.(ii) Overhaul Spares-Normally no overhaul spares would be required in thefirst 24 months. The overhaul spares are therefore to be purchased on PRIndents only based on approved Roll- On-Plan.(iii)Major Assemblies Pool- Same as in respect of indigenous equipmentgiven at Para 5 (a) (iii) above.8.7. Provisioning of Funds and Obtaining Sanction for the Purchase of Initial Spares.(a) Provisioning of Funds. For planning purpose in the yearly budget, financialprovision up to 10% of the capital cost of vehicle/equipment to be purchased, during theyear should be catered for purchase of initial spares.