Diamond Creek MAC Design Guidelines - Nillumbik Shire Council
Diamond Creek MAC Design Guidelines - Nillumbik Shire Council Diamond Creek MAC Design Guidelines - Nillumbik Shire Council
BC02: BOUNDARY TREATMENTS - LANDSCAPE & FENCINGOBJECTIVE: Ensure that development sites with front, side orrear setbacks are extensively landscaped with indigenousvegetation so as to contribute to the Diamond Creek form andcharacter.Encourage front fences that offer a sense of openness from thestreet.DESIGN GUIDELINES & DIRECTIONS:a. Vegetation selection should are of native or indigenousspecies.b. Apply a ‘layered’ landscaping regime which incorporatescanopy trees, shrub planting and low lying plants.c. Seek to define the front boundary through landscapingtreatments and edge planting.d. Front fencing is discouraged. But if required, they shouldbe:▪ Low in height (maximum of 1.2m);▪ Visually transparent (which incorporates regular spacingbetween pickets and rails); and▪ Constructed with light weight materials, such as timberand steel.e. Chain wire or cyclone mesh fencing is discouraged withinareas that are visible from the street.f. Side fences should not begin in front of the main buildingfaçade.g. Side, rear or screen fences should not exceed 1.8m inheight.h. For retaining walls design, refer to guidelines SD04 –Topography.nillumbik shire council | diamond creek major activity centre | general design guidelines 12
- Page 1 and 2: Diamond Creek MAC Design Guidelines
- Page 3 and 4: PART A - DIAMOND CREEK MAC DESIGN G
- Page 6 and 7: PART A - SITE DESIGN GUIDELINESSD01
- Page 8 and 9: SD05: FUNCTIONALITYOBJECTIVE: Ensur
- Page 10 and 11: BD02: BUILDING STYLE & FAÇADE COMP
- Page 14 and 15: BC03: SIGNAGE & LIGHTINGOBJECTIVE:
- Page 16 and 17: PD02: LANDSCAPE - SOFT & HARDOBJECT
- Page 18: Nillumbik Shire CouncilCivic Drive,
BC02: BOUNDARY TREATMENTS - LANDSCAPE & FENCINGOBJECTIVE: Ensure that development sites with front, side orrear setbacks are extensively landscaped with indigenousvegetation so as to contribute to the <strong>Diamond</strong> <strong>Creek</strong> form andcharacter.Encourage front fences that offer a sense of openness from thestreet.DESIGN GUIDELINES & DIRECTIONS:a. Vegetation selection should are of native or indigenousspecies.b. Apply a ‘layered’ landscaping regime which incorporatescanopy trees, shrub planting and low lying plants.c. Seek to define the front boundary through landscapingtreatments and edge planting.d. Front fencing is discouraged. But if required, they shouldbe:▪ Low in height (maximum of 1.2m);▪ Visually transparent (which incorporates regular spacingbetween pickets and rails); and▪ Constructed with light weight materials, such as timberand steel.e. Chain wire or cyclone mesh fencing is discouraged withinareas that are visible from the street.f. Side fences should not begin in front of the main buildingfaçade.g. Side, rear or screen fences should not exceed 1.8m inheight.h. For retaining walls design, refer to guidelines SD04 –Topography.nillumbik shire council | diamond creek major activity centre | general design guidelines 12