You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
co1. Check battery voltage. Must be 12.2 or higher.digital fluke meter. Is voltage OK?No-+Yes!ENGINE ELECTRICALPower Up Testing - Early Type II, 1991-1992 500'sUse aCharge, service and test battery; or replace battery.2. Check voltage between ECU Orange wire and Check fuse link, key switch RlGR to RfIN, and all wires andground, and between Y/Blk and ground. With key switch connections between battery to fuse link; fuse link to keyin the spring loaded position, voltage should read 12.2 or switch, key switch to ECU. Are connections and componentshigher. Is voltage OK?OK?No-+ Yes - See Block 3Yes!No!3. Test self shut-off relay and circuits to relay. Are Repair and/or replace components or wires as needed andcircuits and relay OK?retest.No-+Yes!4. Replace ECU and retest system.o".c..4.39 8/94