Vectrostar 02ENU750 User's manual

COMMISSIONINGCaution : Unplug power before working on the equipment. Commissioning must bemake by entitled personnal onlyImportant : Before each test : Put the casing on the starter in order to avoid contactwith on potential parts.Filling the tank :For use at temperatures under 0°C, add antifreeze to electrolyte. Use only METAL DEPLOYERESISTOR antifreeze (Mono-Ethylene-Glycol). Antifreeze quantity depends on temperature leveland tank capacity.Quantity (L)Température °C R25 R65 R120 R200-10 5 15 25 40-15 10 20 35 60-20 10 25 40 70-25 10 30 50 80Pour out antifreeze into the tank and complete to the MAX level with water.Pluging power supply :Use plastic cable glands to permit the cables to enter the frame of the starter. As the starter isdouble insulated, there is no need to connect it to earth.In order to not apply any torque to the electrodres, use 2 wrenches for clamping your cables toelectrodes.Squirrel cage motorSlip rings motorSecurityUV WStatorMotorUV WStatorTerminalsRotorX Y ZStarterX Y ZElectrodesDoc N° : 02ENU75File :02ENU750Rev : 0Date : 22/12/06Written by: M. ParthiotChecked by: F.Lavogiez Page : 6 / 15