EI ENGINE IMMOBILISER
EI ENGINE IMMOBILISER
EI ENGINE IMMOBILISER
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>EI</strong>–3<strong>ENGINE</strong> <strong>IMMOBILISER</strong> - <strong>ENGINE</strong> <strong>IMMOBILISER</strong> SYSTEM3 CHECK FOR DTCs OF EFI (engine control system)HINT:(See page ES-8)(a) Check for DTCs of the EFI system using the DS-II.ResultDTC is not outputDTC is outputProceed toAB<strong>EI</strong>BGO TO <strong>ENGINE</strong> CONTROL SYSTEMA4 CHECK FOR DTCs OF IMB (<strong>ENGINE</strong> <strong>IMMOBILISER</strong> SYSTEM)(a)(b)(c)Using the DS-II, check for DTCs (see page <strong>EI</strong>-1). Record any DTCs.Delete the DTCs.Reproduce the symptoms based on the recorded code, and check ifthe same DTC is output.ResultDTC is not outputDTC is outputProceed toABBGO TO TROUBLESHOOTING FOR EACHOUTPUT DTCA5 PROBLEM SYMPTOMS TABLE(a)Check if the symptom is listed in problem symptoms table (see page<strong>EI</strong>-2)ResultSymptom is not listed in problem symptoms tableSymptom is listed in problem symptoms tableProceed toABBGO TO INSPECTION PROCEDURE 9A6 PERFORM TROUBLESHOOTING BASED ON PROBLEM SYMPTOM(a)(b)ECU DATA LIST / ACTIVE TEST (see page <strong>EI</strong>-9)ECU terminals (See page <strong>EI</strong>-7)
Change language