EI ENGINE IMMOBILISER
EI ENGINE IMMOBILISER
EI ENGINE IMMOBILISER
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ENGINE</strong> <strong>IMMOBILISER</strong> - <strong>ENGINE</strong> <strong>IMMOBILISER</strong> SYSTEM<strong>EI</strong>–22Transponder Key Computer AssemblyVehicle Side Connector(b)Using the tester, measure the continuity between terminals of theconnector on the vehicle wire harness side.StandardTerminal No. (Terminal Symbols)Immobiliser ECU ←→ Steering column upper with switchbracket assemblyContinuity6(COL+) ←→ 1(COL-)13(COL+) ←→ 2(COL-)ContinuityContinuityCOL-COL+Steering Column Upper WithSwitch Bracket AssemblyVehicle Side ConnectorNGREPAIR OR REPLACE WIRE HARNESS ORCONNECTOR<strong>EI</strong>COL+COL-B143233J01OK2 REPLACE TRANSPONDER KEY COMPUTER ASSEMBLY(a)(b)Replace the transponder key computer assembly and register the keycode.Clear DTCs using the DS-II.3 CHECK FOR DTCs(a)Check for DTCs using the DS-II.StandardResultDTCs B2797/24 and B2798/25 are notoutputDTCs B2797/24 and B2798/25 areoutputProceed toABBREPLACE STEERING COLUMN UPPERWITH SWITCH BRACKET ASSEMBLYAENDTO INDEXTO NEXT SECTION