EI ENGINE IMMOBILISER
EI ENGINE IMMOBILISER
EI ENGINE IMMOBILISER
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ENGINE</strong> <strong>IMMOBILISER</strong> - <strong>ENGINE</strong> <strong>IMMOBILISER</strong> SYSTEM<strong>EI</strong>–14Engine Control Computer(b)Using the tester, measure the continuity between terminals of theconnector on the vehicle wire harness side.StandardTerminal No. (Terminal Symbols)Immobilizer ECU ←→ Engine ECUContinuity8 (SIO2) ←→ 117 (SIO2) ContinuityNGREPAIR OR REPLACE WIRE HARNESS ORCONNECTORSIO2Connector CTransponder Key Computer AssemblyVehicle Side Connector<strong>EI</strong>SIO2B143232J01OK2 REPLACE TRANSPONDER KEY COMPUTER ASSEMBLY(a)(b)Replace the transponder key computer assembly and register the keycode.Clear DTCs using the DS-II.3 CHECK FOR DTCs(a)Check for DTCs using the DS-II.StandardResultDTCs B2788/41 and B2789/42 are not outputDTCs B2788/41 and B2789/42 are outputProceed toABBREPLACE <strong>ENGINE</strong> CONTROL COMPUTERAEND
Change language