EI ENGINE IMMOBILISER
EI ENGINE IMMOBILISER
EI ENGINE IMMOBILISER
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ENGINE</strong> <strong>IMMOBILISER</strong> - <strong>ENGINE</strong> <strong>IMMOBILISER</strong> SYSTEM<strong>EI</strong>–124 CHECK WIRE HARNESS AND CONNECTORTransponder Key Computer AssemblyVehicle Side Connector(a)(b)Disconnect the transponder key computer assembly and thecombination meter assembly connectors.Using the tester, measure the continuity between terminals of theconnector on the vehicle side.StandardTransponder Key Computer Assembly ←→ Combination MeterAssemblyTerminal No. (Terminal Symbols)NGKSWCombination Meter AssemblyKSW B143231J01Continuity3 (KSW) ←→ 26 (KSW) ContinuityREPAIR OR REPLACE WIRE HARNESS ORCONNECTOR<strong>EI</strong>OK5 REPLACE TRANSPONDER KEY COMPUTER ASSEMBLY(a)(b)Replace the transponder key computer assembly and register the keycode.Clear DTCs using the DS-II.6 CHECK FOR DTCs(a)Check for DTCs using the DS-II.StandardResultDTC B2780/15 is not outputDTC B2780/15 is outputProceed toABBREPLACE COMBINATION METERASSEMBLYAEND