Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Hydraulic systemTo raise the front rotor to transport position· Screw in set screws (6) and (7) on the liftingcylinder of the front rotor· Press set screw (B) away from the way valve.· Once the rotor is in the transport position, unscrewset screws (6) and (7) again.Crush hazard!Block is located in the machine!6 76 = right cylinder7 = left cylinder6 7SW1350-<strong>02</strong>0To raise the rear rotor to transport position· Screw in set screws (8) and (9) on the liftingcylinder of the rear rotor· Press set screw (B) away from the way valve.· Once the rotor is in the transport position, firstactivate the switching valve (shut off the hydraulicline) and then unscrew set screws (8) and (9) again.· Activate the switching valve (release the hydraulicline)8 = right lifting cylinder9 = left lifting cylinder8 9 8 9SW1350-<strong>02</strong>1V - 4