Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
16. After removing the PTO shaft, attach the protectivecover to the PTO shaft end!17. If damage occurs, correct this immediately beforeusing the implement!2.3.3Hydraulic System1. The hydraulic system is pressurized!2. When connecting hydraulic cylinders andengines, make sure that the hydraulic hoses areconnected correctly!3. When connecting the hydraulic hoses to the tractorhydraulics, make sure that the hydraulics of both thetractor and the implement have been depressurized!4. In the case of hydraulic connections between tractorand implement the coupling sleeves and plugs shouldbe marked to ensure a proper connection! If theconnections are switched, the function will be reversed(e.g. raising/lowering) - danger of accidents!5. Check the hydraulic hose lines at regular intervals andreplace them if damaged or worn! The new hoses mustfulfill the technical requirements set by the manufacturerof the implement!6. When searching for leaks, use suitable aids to avoid therisk of injuries!7. Liquids escaping under high pressure (hydraulic oil) canpenetrate the skin and cause serious injury! Seekmedical help immediately should injuries occur! Risk ofinfection!8. Before working on the hydraulic system, lower theimplement, depressurize the system and switch off theengine!2.3.4 Tyres1. When working on the tyres, make sure that theimplement has been safely lowered and securedagainst rolling (wheel chocks).2. Installing wheels and tyres requires adequateknowledge and suitable tools!3. Repair work on the tyres and wheels should be doneby specially trained personnel using appropriateinstallation tools only!4. Check tyre pressure regularly! Inflate the tyres to therecommended pressures!2.3.5 Working in the Vicinity of PowerTransmission Lines1. Always take great care when working under or inthe vicinity of power transmission lines.2. When transporting the machine during operation,make sure that the total height does not exceed3.5 m.3. If there is any need to travel under overhead lines,the machine operator must request information onthe rated voltage and the minimum height of theoverhead lines from the overhead line operator.4. Always keep the safe distances according to thetable.Rated voltagekVSafe distance fromoverhead linesmto 1 1Above: 1 to 110 2Above: 101 to 220 3Above: 220 to 380 4II - 3
Change language