SkyView - Dynon Avionics

7. SV-EMS-220 Installation and ConfigurationThis chapter contains information and diagrams that specifically apply to the installation of theSV-EMS-220 Engine Monitoring module and compatible transducers and sensors. After readingthis chapter, you should be able to determine how to prepare an installation location, how tomount the module and its transducers and sensors, how to make all necessary electrical andtransducer and sensor connections, and also how to configure the SkyView system for theinstallation’s engine parameter sensing.Note that Dynon provides preconfigured sensor mapping and settings files as well as premadeengine sensor connection wire harnesses. These resources support many popular four and sixcylinderengine installations. Reference the Example Engine Sensor and Transducer InstallationsSection for examples.Figure 21 is a high-level overview of a suggested installation, configuration, and calibrationprocedure for the SV-EMS-220 and its associated wiring, sensors, and transducers.Research DynonpresupportedengineinstallationsEnginepresupported?NoPlan sensor andtransducerinstallationChoose alocation based onLocationRequirementsSectionYesUnderstandpresupportedengineinstallationObtain wireharnesses,sensors,transducers, etc.Prepare thelocationInstall SkyViewnetwork cablingInstall enginesensors andtransducersInstallEMS-specific wireharnessesInstall EMSmodule withelectricalconnectionsConfigureSkyView Network*Check for and installEMS sensor definitionand configuration fileupdatesConfigureEMS-relatedsettings onSkyView displayPerformEMS-relatedcalibrations*Assumes SV-D700 or SV-D1000 is properly installed and working.Figure 21–Suggested SV-EMS-220 Installation and Configuration ProcedureSkyView System Installation Guide - Revision J 7-1