SkyView - Dynon Avionics

SV-D700 / SV-D1000 Installation and Configurationthe SV-GPS-250). Aviation is used by some Garmin and Bendix/King panel mount equipment. Ifyour specific equipment is listed by brand and model, we recommend you configure SkyView touse this option instead of a generic data format.If you have any ARINC-429 devices, these are configured separately. See the SV-ARINC-429Installation and Configuration Section of this guide for more information.Input FunctionSkyView has several options for input functions: NONE, GPS, NAV, or POS. Set the device’s inputfunction to NONE if it does not have an input function.GPS devices provide GPS position and navigational information. These devices aregenerally "moving maps" that depict airports, airspaces, etc, and can generate flightplans. They provide source data for the moving map, HSI, autopilot, synthetic vision, andthe clock in the Top Bar. An example GPS device is a Garmin X96.NAV devices provide radio-based navigational information from a VOR or ILS. Theyprovide source data for the HSI and autopilot. SkyView currently supports only theGarmin SL30 NAV Radio.POS devices provide only positional information. These are generally simple GPSreceivers which cannot do flight planning. They provide source data for the moving map,synthetic vision, and the clock in the Top Bar. Note that a POS device does not provideany data for the HSI and will not appear in the HSI NAVSRC rotation. An example POSdevice is the Dynon SV-GPS-250.Input Function Considerations and PrioritiesDynon’s Moving Map Page uses POS and GPS sources for its data. Regardless of the number ofdata sources in your system, this page prioritizes these sources and fails over to them asfollows:POS 1 GPS 1GPS 2GPS 3GPS 4POS 2POS 3POS 4For example, if your system has one SV-GPS-250 configured as POS 1 and a Garmin 396configured as GPS 1, the Moving Map will always use the SV-GPS-250 as its primary data source.If the SV-GPS-250 fails or you configure its input function to NONE, the Moving Map Page willuse the Garmin 396 (or other GPS source) configured as GPS 1 as its primary data source.The SkyView HSI uses GPS and NAV sources for its overlays and the user must choose thesource during operation.SkyView’s internal Navigation Mapping Software can generate navigationinformation which can be displayed on the HSI. The Navigation Mapping Softwarerequires GPS position information, which is sourced from the active (highestpriority in the above list) POS or GPS source. Regardless of what source is beingused for position information, the navigation provided by the Navigation MappingSoftware is always the GPS0 source on the HSI.SkyView System Installation Guide - Revision J 4-17