SkyView - Dynon Avionics

Revision Revision Date DescriptionSV-EMS-220 Installation and Configuration ChapterUpdates:Clarified the theory behind and the use of EMSsensor definition and configuration files inSkyView.Added a section regarding SV-EMS-220 wireharnesses.Added example engine sensor and transducerinstallations.Removed the requirement for a 200 ohm pulldown resistor in the Rotax oil pressure sensorinstallation.Removed the requirement for a 1.21k ohm pullup resistor in the Rotax CHT sensor installation.The SV-EMS-220 is capable of measuringdifferential fuel flow. All information in the guidehas been updated to reflect this.Fixed the fuse call-out on in the Ammeter ShuntSection. Revision A called out a 7.5 amp fuse. Thisguide calls out a 1 amp fuse.Documented other minor sensor installationrequirements corrections as required.Clarified SV-GPS-250 installation requirements.Expanded Appendix C: Wiring and Electrical Connections.C May 2010Document number changed to 101320-002.Minor style changes.Added information in applicable locations regarding theSV-NET-SERVO wiring kit.Color-coded the connectors in the example SkyViewsystems figures to indicate gender.Updated the guide to include HSI requirements and otherrelated information.Updated the guide to reflect autopilot functionality,calibration, and testing information. The most notablechanges are to the Autopilot Servo Installation,Configuration, and Calibration Section.Expanded the Input Function Section under the SerialPort Configuration Section in the SV-D700 / SV-D1000SkyView System Installation Guide - Revision Jv