SkyView - Dynon Avionics

4. SV-D700 / SV-D1000 Installation and ConfigurationThis chapter contains information and diagrams that specifically apply to SkyView displayinstallation. After reading this section, you should be able to determine how to prepare a panelfor display installation, how to mount a display, how to make all necessary electricalconnections, and also how to configure a display.Figure 12 is a high-level overview of a suggested installation and configuration procedure forSkyView displays and their associated components.Choose a panellocation based onLocationRequirementsSectionPrepare thepanel (cutopening and drillholes)Install SkyViewDisplay Harness(SV-HARNESS-D37)Connect powerand ground wireswith fuse orbreaker on powerTest displaypower (turn on oruse multimeter)Connect otherSkyView modules(e.g., ADAHRS andEMS)Referenceother chaptersin this guide...Connect externalserial devices(e.g., transponderand GPS)Mount display inpanelCheck forfirmwareupdateNonewfirmwareUpdate terraindatabase?(outside NorthAmerica)NoUpdateaviationdatabase?NoNewfirmwareYesYesDownload andinstall firmwareDownload andinstall terraindatabaseDownload andinstall aviationdatabaseConfigure displaysettings andSkyView NetworkFigure 12–Suggested SkyView Display Installation ProcedureSkyView System Installation Guide - Revision J 4-1