You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Basic <strong>SkyView</strong> Display OperationServo Calibration–Enter this menu for autopilot servo calibration. Reference theAutopilot Servo Installation, Configuration, and Calibration Section of this guide formore details.Note that if an ADAHRS, EMS, or Servos are not present on the <strong>SkyView</strong> network,this menu will note the absence by displaying “(EMS NOT DETECTED)” ,“(ADAHRSNOT DETECTED)”, or “(SERVOS NOT INSTALLED)”Firmware Updates and File Operations<strong>Dynon</strong> plans to provide new functionality and capability for the <strong>SkyView</strong> system via firmwareupdates. Use the resources mentioned in the Contact Information Section of this document tostay current on firmware availability for <strong>SkyView</strong>.Firmware updates and file operations are performed using a USB flash drive. A flash drive withat least 50 Megabytes of storage is required for standard firmware updates. A drive with atleast 4 Gigabytes of storage capacity is required for terrain file updates. Note that a 4 GigabyteUSB flash drive is included with every <strong>SkyView</strong> display, and is the recommended USB flash drivefor these operations.In order to open the System Software Menu, you must have a USB flash drive plugged in to your<strong>SkyView</strong> display.Updating the firmware on a <strong>SkyView</strong> display automatically updates all of themodules connected on the same <strong>SkyView</strong> network, except for other <strong>SkyView</strong>displays. Each display must be updated individually.How to Update Firmware1. Download the latest <strong>SkyView</strong> firmware file from downloads.dynonavionics.com.2. Copy the firmware file onto your USB flash drive. The firmware file must be in the rootdirectory of the drive in order to be recognizable by the display.3. Insert the USB flash drive into one of the display’s USB sockets.4. Go to the Upgrade System Software Wizard (SETUP MENU > SYSTEM SOFTWARE >UPGRADE SYSTEM SOFTWARE…).5. Update the firmware on the unit by pressing UPDATE or press CANCEL to return to theSystem Software Menu.How to Export System SettingsThis operation creates a set of files on the USB flash drive that contain displaysettings, equipment settings, and important calibration information. All of thefilenames contain the tail number and the firmware version.1. Insert the USB flash drive into one of the display’s USB sockets.2. Go to the Export Settings Wizard (SETUP MENU > SYSTEM SOFTWARE > EXPORTSETTINGS…).3. Create a file name for the settings file.<strong>SkyView</strong> System Installation Guide - Revision J 3-13
Change language