You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Basic <strong>SkyView</strong> Display OperationUpgrade System Software...–Use this wizard to update software on your <strong>SkyView</strong>system.Export System Settings...–Use this wizard to export the settings on your <strong>SkyView</strong> systemto a USB flash drive.Export Data Log...–Datalogging is for internal use only. User-datalogging is notsupported at this time.Load Files...–Use this wizard to load files such as settings or configuration files or deletefiles from the USB flash drive.System Setup MenuThis menu contains links to the following menus and pages:Network Setup–Enter this menu to configure your <strong>SkyView</strong> network or to check onnetwork status (i.e., display important <strong>SkyView</strong> module information).Aircraft Information–Enter this page to record important information regarding youraircraft. Specifically, enter the tail number of your aircraft–it is used to create unique<strong>SkyView</strong> configuration files. It is also used for other purposes.Measurement Units–Enter this page to configure displayed units (e.g., feet or meters).Time–Enter this page to set the time zone offset from Zulu/GMT time.ARINC-429–Enter this page to set up ARINC-429 devices connected to SV-ARINC-429modules.Local Display Setup MenuThis menu contains links to the following pages and menus:Installed Databases–This page shows the various databases that are installed on thedisplay and their respective versions.Display Hardware Information–This page contains important hardware statusinformation such as the serial number of your display and the voltage of the attachedbackup battery. Reference the Returning <strong>SkyView</strong> Components to Service after RepairSection of this guide for more information about the Display Hardware InformationPage.Serial Port Setup–Enter this menu to configure the five general purpose serial ports onthe display.Brightness Setup–Enter this page to choose between manual, automatic, or externalscreen backlight control. Manual screen backlight control is managed by the user in theDIM Menu with the DEC-, INC+, and FULL buttons. Automatic screen backlight control ismanaged by a default dimming profile in the display. A compatible external controlsignal is required for external backlight control. Reference the Brightness Setup Sectionfor more information.Top Bar Setup–Enter this page to configure the top bar on the <strong>SkyView</strong> display's screen.3-10 <strong>SkyView</strong> System Installation Guide - Revision J
Change language