SkyView - Dynon Avionics

Basic SkyView Display OperationA button has a function if there is a label above it. If there is no label, there is no function. Thefigure below shows an example button label.Figure 9–Example Button LabelWhen you press a button, its label is highlighted. When you let go, that button’s action isinvoked.Button labels are called out in all capital letters such as BACK, EXIT, FINISH, andCLEAR. This guide directs users to press a button by using its label. For example,when this guide asks you to press FINISH, it is asking you to press the button withthe FINISH label above it.Joystick and Button Operation ExampleSome parameters may need to be adjusted using a joystick. When setting values with thejoystick, each character (symbol, letter or digit) must be selected and adjusted successively.Figure 10–Adjusting Successive CharactersIn this example, the first time you turn the joystick, you toggle between the “-“ and “+”symbols. To change the succeeding characters, you must move the cursor joystick to the right.In this example, you first adjust the “-“ or “+” character, move the joystick right, then adjust theone hundreds digit, and so forth. Once you have adjusted the value appropriately, pressACCEPT or move the joystick to the right again.At times, the next item in the menu path in this guide may be a joystick selection OR a buttonpush—the correct choice will be apparent.3-4 SkyView System Installation Guide - Revision J