SkyView - Dynon Avionics

Basic SkyView Display OperationDisplay Bezel LayoutThe following diagram illustrates the front of an SV-D1000 display and its important parts.Figure 7–SkyView Display Front Bezel LayoutNote the top bar, screen, joystick and button labels, light sensor, two joysticks and eightbuttons.The top bar is user configurable and displays important textual information. The top bar in thecurrent release of SkyView only shows time and autopilot status. Future firmware updates willenable expanded functionality. Reference the Local Display Setup Menu Section of this guidefor details on how to configure the top bar.The screen shows PFD, Engine, and Moving Map data, configuration information, and systemalerts. Its layout is user-configurable. Reference the SkyView Pilot’s User Guide for instructionson how to configure the layout of your screen.Joystick and button labels are also on the screen. Joystick and button functionality is contextualbased on what is onscreen and these labels show the user the current function. For example, the(RNG) label above joystick 2 in Figure 7 shows that turning that joystick will either increase ordecrease the range shown on the Moving Map.3-2 SkyView System Installation Guide - Revision J