SkyView - Dynon Avionics

System PlanningHSI RequirementsThe SkyView HSI overlay on the PFD’s DG requires an external GPS (e.g., Garmin X96) or NAV(e.g., Garmin SL30) radio. It can also be generated by SkyView when its Navigation MappingSoftware is in use. Reference the Serial Devices and SV-ARINC-429 Installation andConfiguration sections of this guide for more information regarding external data sources.The SV-GPS-250’s GPS data alone is only a position source (and only a subset of thedata provided by other, external GPS devices such as a Garmin X96). It can notprovide navigation without the Navigation Mapping Software and appropriateaviation databases installed.Table 7 outlines the functionality enabled by each source.DataSV-GPS-250GPSDynonNavigationMapSoftwareNMEAGPSAviationGPSARINC-429GPS via SV-ARINC-429ARINC-429/Serial (SL30)NAVSkyViewADAHRSBearing Pointers Course Deviation Course Direction Waypoint orStation Identifier To/From Flag Lat/Long GPS Altitude 5Ground Speed Ground Track Distance to Waypoint LPV/VNAV GPSApproaches 1VFR Vertical Guidance 2DME 3GlideslopeTuned FrequencyTrue AirspeedMagnetic HeadingSkyView Time Source 5HZ GPS Updates Winds 4 Table 7–HSI Requirements1 Approach-certified WAAS GPS units only.2 Some models.3 Requires additional DME equipment connected to compatible non-Dynon hardware.4 Winds calculation specifically requires GPS, OAT, IAS, and magnetic heading.5Requires additional Aviation format serial input into SV-ARINC-429 module2-14 SkyView System Installation Guide - Revision J