SkyView - Dynon Avionics

` Appendix E: Serial Data OutputParameterStartCharacterPositionNumCharsAP Yaw Force 50 2TransponderStatusTransponderReplyRange ofvalues /Units00 to 80force exertedby the yawservo52 1 0 to 353 1 0 or 1Example/Notes00 (no force exerted)80 (max force before slipping)00 if not engaged or AP notinstalledSee Note 1(this field will currently be 00)0=SBY, 1= GND, 2=ON, 3=ALTX if transponder not installed ornot communicating0 = No reply in last second, 1 =at least one reply within lastsecondX if transponder not installed ornot communicatingTransponderIdentTransponderCode54 1 0 or 10 = not IDENT'ing, 1 = IDENTactive, as reported byTransponderX if transponder not installed ornot communicatingXXXX if transponder not55 4 0000 to 7777installed or not communicatingChecksum 59 2 00 to FF1 byte sum of all 58 precedingbytes in hexCR/LF 61 2 0x0D,0x0A Carriage Return, LinefeedTable 62 – SkyView SYSTEM Serial Data Output FormatNote 1: Yaw axis AP does not exist at this time, but the serial output format supports it.As an example, the following is one line of DYNON SYSTEM serial output data:!2118132412302+00101590+0500020050+16XXX30L00U02R000001110F6SkyView System Installation Guide - Revision J 19-7