SkyView - Dynon Avionics

Appendix E: Serial Data OutputParameterStartCharacterPositionNumCharsCDI Scale 33 2CDI DeflectionSignCDI Deflection 36 2GlideslopeSignGlideslope 39 2Range ofvalues /Units00 to 501/10 * NM35 1 ‘+’, or ‘-’00 to 99percent38 1 ‘+’, or ‘-’00 to 99percentAP Engaged 41 1 0 to 7AP Roll Mode 42 1 0 to 3AP Roll ForceSignAP Roll Force 44 2AP Pitch ForceSignAP Pitch Force 47 2AP Yaw ForceSignExample/Notes50 (5.0 NM)X when not in GPS mode (thereis no scale in NAV or LOCmodes) or CDI invalid‘+’ means deflected to rightX if CDI invalid50 (50 percent deflection)XX if CDI invalid‘+’ means deflected upX if glideslope invalid50 (50 percent deflection)XX if glideslope invalid0=Off, 1= roll only, 2=pitch only,3= roll+pitch, 4=yaw,5=roll+yaw, 6=pitch+yaw,7=pitch+roll+yaw0 if AP not installedSee Note 10=Heading, 1=Track, 2=NAV,3=GPS Steering,0 if AP not installed43 1 ‘L’ or ‘R‘ ‘L’ mean leftward force exerted00 to 80force exertedby the rollservo00 (no force exerted)80 (max force before slipping)00 if not engaged or AP notinstalled46 1 ‘U’ or ‘D‘ ‘U’ means upward force exerted00 to 80force exertedby the pitchservo49 1 ‘L’ or ‘R‘00 (no force exerted)80 (max force before slipping)00 if not engaged or AP notinstalled‘L’ means leftward forceexerted19-6 SkyView System Installation Guide - Revision J