SkyView - Dynon Avionics

` Appendix C: Wiring and Electrical ConnectionsSV-XPNDR-26X ADS-B ComplianceSV-XPNDR-26X transponder modules include support for Extended Squitter ADS-B out. The SV-XPNDR-26X is a DO-260A change 2 compliant class B0 broadcast-only participant.ADS-B Parameters SupportedThe following table lists the ADS-B parameters that are transmitted by the SV-XPNDR-26Xtransponder when connected to an appropriate GPS receiver.ParameterBDS RegisterSPI 0,5Emergency Indicator 0,5Barometric Altitude 0,5Quality Indicator (NIC) 0,5AirbornePositionLatitude 0,5Longitude 0,5Quality Indicator (NIC) 0,6Surface PositionLatitude 0,6Longitude 0,6Surface Ground Speed 0,6Surface Ground Track 0,6Aircraft Identification 0,8Airborne Ground Velocity 0,9Emergency Status 6,1Quality Indicator (NACp) 6,5Quality Indicator (SIL) 6,5Version Indicator 6,5Surface Length/Width 6,5Table 60 - SV-XPNDR-26X ADS-B Parameters SupportedIn addition the TEST message with 4096 squawk code information can also be transmitted tosupport coordination with ATC radar systems. TEST message transmission status is aninstallation option.In all cases, uncompensated latency due to the transponder is less than 10 milliseconds.Analysis of the system latency should add this to the latency of the GPS system and theSkyView System Installation Guide - Revision J 17-15