SkyView - Dynon Avionics

SV-EMS-220 Installation and ConfigurationExample Rotax 912EMS 37-pin HarnessPinWire ColorSensor (with Dynon part number ifapplicable)1 Red Battery voltage (voltmeter input)2 Yellow Not connected3 Black Ground4 Purple/Blue Rotax CHT or oil (801-10-1)5 Black Ground6 White/Yellow Rotax oil pressure (Honeywell)7 White/Brown Rotax CHT or oil (801-10-1)8 Brown Fuel pressure (100411-000)9 Brown/Blue Heated pitot status (contact input)10 Brown/Yellow Not connected11 Orange Not connected12 Yellow Flaps position potentiometer13 Black Ground14 Yellow Fuel flow (100403-003)15 Red Not connected16 Black Ground17 Black Ground18 White/Red MAP Sensor Power (+5 volt)19 White/Black Not connected20 Orange/Brown Fuel level left (resistive)21 Orange/Blue Fuel level right (resistive)22 Purple/Yellow Rotax CHT or oil (801-10-1)23 Purple/Green Elevator position potentiometer24 Orange/Green Ammeter shunt + (100412-000)25 Orange/Purple Ammeter shunt -26 Green/Red Manifold pressure (100434-000)27 Open Not connected28 Open Not connected29 Yellow/Green Optional External Alarm Light30 Black Not connected31 White/Orange Not connected32 White/Green RPM33 White/Blue Not Connected34 Blue Not connected35 Green Not connected36 Blue Not connected37 Green Not connectedTable 29–Example Rotax 912 37-pin Connector Sensor Map7-22 SkyView System Installation Guide - Revision J