Electric Sprayers Brochure Australia - Graco Inc.

The Ultra 395’s reliability and performancehas made it Graco’s most popular smallelectric sprayer. Proven technology anddesign make it perfect for professionalswho spray daily with a wide rangeof coatings.Ultra 395Now with Higher Performance!Proven Endurance Pump• Long-life V-Max Blue Packings, Chromex Rod,and Hardened Stainless Steel cylinder• QuikAccess intake valve to easily cleanor clear debrisSmartControl 1.0Pressure Control• Microprocessor control delivers a consistentspray fan without pressure fluctuationat all spraying pressures• Tight deadband and fast responsewhen sprayingTotally Enclosed DC Motor• Enclosed design protects internalmotor components from dirt, dust,and overspray to extend motor lifeSwivel Inlet Suction Hose• All aluminum construction is durable,lightweight, and rust free• No-tools removal of hose for cleaningor accessing inlet ball• Easily swivels to reach buckets or cans• Stands upright so it won’t tip cans over• Big Cup holds the inlet duringtransport to catch dripsWelded Steel Frame• Rugged four-leg design for solid footingplus rugged leg caps to protect floor• Offset handle with rubber comfort gripprovides comfortable carrying• Welded steel cord wrap doublesas a chain “lock down”• Choose Stand, Hi-Boy or Lo-Boy cartDESCRIPTION PART NUMBER MAX TIP SIZE MAX LPM MAX PSIUltra 395 Stand 234180 .023 2.0 3300Comes complete with: New FTx Gun, RAC X 515 Tip and Guard, 6.4 mm x 15 m BlueMax II Hose.Easy Out Pump Filter• Filtering reduces tip clogsand ensures a quality finish• Easy Out design filters from the insideout – so filters won’t get stuck orcollapse when dirty• Filter removes with the cap for less messOffset handle for comfortable carrying.Easy Out pump filter removes simplywith the cap.QuikAccess intake requires only ahammer to access the intake ball.3

Ultra Max II 595Now with Higher Performance!The Ultra Max II 595 is a workhorse.It’s proven to be a hit with contractorswho are looking for higher outputand professional features, in a compactand portable sprayer.Proven Endurance Pump• Long-life V-Max Blue Packings,Chromex Rod, and HardenedStainless Steel cylinder• QuikAccess intake valve to easily cleanor clear debrisSmartControl 2.0Pressure Control• Advanced microprocessor control deliversGraco’s most consistent spray fanavailable at all spraying pressures• Zero deadband at lower spraying pressures –ideally suited for fine finish sprayingExclusiveBrushless DC Motor• Compact, lightweight motor delivershigher horsepower per wall amp• No brushes to replace• Enclosed design protects internal motorcomponents from dirt, dust, andoverspray to extend motor lifeComes complete with: New FTx Gun, RAC X 515 Tip and Guard, 6.4 mm x 15 m BlueMax II Hose.Lo-Boy Unit ShownDESCRIPTION PART NUMBER MAX TIP SIZE MAX LPM MAX PSIUltra Max II 595 Hi-Boy 249934 .027 2.6 3300Ultra Max II 595 Lo-Boy 253107 .027 2.6 3300Chrome Plated,Welded Steel Lo-Boy Cart• Low profile, compact design transports easilyin tight spaces• Retractable handle allows sprayer to rollcomfortably behind you• Integrated hose wrap and pail hook for ultimateportabilityEasy Out Pump Filter• Filtering reduces tip clogs and ensuresa quality finish• Easy Out design filters from the inside out –so filters won’t get stuck or collapse when dirty• Filter removes with the cap for less messSwivel Inlet Suction Hose6TiltBack cart design (Hi-boy shown).Inlet tube removes by hand for easyclean up.Retractable handle for simple removalof coiled hose.• All aluminum construction is durable,lightweight, and rust-free• No-tools removal of hose for cleaningor accessing inlet ball• Easily swivels to reach buckets or cans• Stands upright so it won’t tip cans over

The Ultra Max II 695 is the industrystandard for professional contractorswho spray a full range of coatingson residential, commercial and industrialjobs.The Ultra Max II 695 handlesthe most common tip sizes, longer hoselengths and heavier coatings with ease.Ultra Max II 695 Hi-BoyNow with Higher Performance!Proven Endurance Pump• Larger fluid passages handle heaviercoatings with ease• Long-life V-Max Blue Packings, Chromex Rod,and Hardened Stainless Steel cylinder• QuikAccess intake valve to easily cleanor clear debris• Hand removable inlet tubeSmartControl 2.0Pressure Control• Advanced microprocessor control deliversGraco’s most consistent spray fanat all spraying pressures• Zero deadband at lower sprayingpressures makes the 695 idealfor fine finish spraying• WatchDog system automatically shuts offsprayer when bucket is empty to prevent damageExclusive Brushless DC Motor• Compact, lightweight motor delivershigher horsepower per wall amp• No brushes to replace• Enclosed design protects internal motorcomponents from dirt, dust and oversprayto extend motor lifeChrome Plated,Welded Steel Hi-Boy cart• Retractable handle systemdoubles as a hose wrap• TiltBack cart design• Lift handles offer convenient grab points• Welded steel power cord wrap• Tubed pneumatic wheels roll easilyon all surfacesDESCRIPTION PART NUMBER MAX TIP SIZE MAX LPM MAX PSIUltra Max II 695 Hi-Boy 249685 .029 3.0 3300Comes complete with Digital Display, AutoClean2 ,Toolbox, and New Contractor Gun, 6.4 mm x 15 m BlueMax II Airless Hose,RAC X 517 Tip and GuardEasy Out Pump Filter• Filtering reduces tip clogs and ensuresa quality finish• Easy Out design filters from the inside out –so filters won’t get stuck or collapse when dirty• Filter removes with the cap for less messQuikAccess intake requires only ahammer to access the intake ball.Digital display with pressure readout,job/lifetime counters, and AutoClean2 timer.WatchDog Pump Protection Systemprevents dry pumping damage.7

Ultra Max II 695 Lo-BoyNow with Higher Performance!The Ultra Max II 695 is also availablein a compact Lo-Boy cart modelfor improved portability. Perfectfor professional contractors whospray a full range of coatingson residential, commercialand industrial jobs.Proven Endurance Pump• Larger fluid passages handleheavier coatings with ease• Long-life V-Max Blue Packings,Chromex Rod and HardenedStainless Steel cylinder• QuikAccess intake valve to easilyclean or clear debris• Hand removable inlet suction hoseSmartControl 2.0Pressure Control• Advanced microprocessor control deliversGraco’s most consistent spray fanat all spraying pressures• Zero deadband at lower sprayingpressures makes the 695 idealfor fine finish spraying• WatchDog system automatically shuts off sprayerwhen bucket is empty to prevent damageExclusive Brushless DC Motor• Compact, lightweight motor delivershigher horsepower per wall amp• No brushes to replace• Enclosed design protects internal motorcomponents from dirt, dust and oversprayto extend motor lifeDESCRIPTION PART NUMBER MAX TIP SIZE MAX LPM MAX PSIUltra Max II 695 Lo-Boy 255139 .029 3.0 3300Comes complete with Digital Display, AutoClean2 ,Toolbox, and New Contractor Gun, 6.4 mm x 15 m BlueMax II Airless Hose,RAC X 517 Tip and GuardChrome Plated,Welded Steel Lo-Boy Cart• Rugged welded steel construction• Retractable handle allows sprayer to rollcomfortably behind you• Tubed pneumatic wheels rolleasily on all surfaces• Integrated hose wrap and pail hook forultimate portabilityEasy Out Pump Filter8Swivel inlet suction hose.QuikAccess intake requires only ahammer to access the intake ball.Watchdog Pump Protection Systemprevents dry pumping damage.• Filtering reduces tip clogsand ensures a quality finish• Easy Out design filters fromthe inside out – so filters won’tget stuck or collapse when dirty• Filter removes with the cap for less mess

The Ultra Max II 795 is ideal for one gunand occasional two gun sprayingon residential, commercial and industrialjobs. Its higher output delivers consistentperformance with larger tips and longerhoses spraying heavier coatings.Ultra Max II 795Proven Endurance Pump• Larger fluid passages handleheavier coatings with ease• Long-life V-Max Blue Packings, Chromex Rod,and Hardened Stainless Steel cylinder• QuikAccess intake valve to easily cleanor clear debris• Hand removable inlet tubeSmartControl 2.0Pressure Control• Advanced microprocessor control deliversGraco’s most consistent spray fanat all spraying pressures• Zero deadband at lower sprayingpressures makes the 795 idealfor fine finish spraying• WatchDog system automatically shuts offsprayer when bucket is empty to prevent damageExclusive Brushless DC Motor• Compact, lightweight motor delivershigher horsepower per wall amp• No brushes to replace• Enclosed design protects internal motorcomponents from dirt, dust and oversprayto extend motor lifeChrome Plated,Welded Steel Hi-Boy Cart• Rugged welded steel construction• Integrated hose wrap with retractable handle• TiltBack cart design• Lift handles offer convenient grab points• Welded steel power cord wrap• Tubed pneumatic wheels roll easilyon all surfaces(795 also available in Lo-Boy version,see 695 Lo-Boy on previous page for Lo-Boy cart features.)Hi-Boy Unit ShownDESCRIPTION PART NUMBER MAX TIP SIZE MAX LPM MAX PSIUltra Max II 795 Hi-Boy 249687 .031–1 gun, .023–2 guns 3.6 3300Ultra Max II 795 Lo-Boy 255140 .031–1 gun, .023–2 guns 3.6 3300Comes complete with Digital Display, AutoClean2,Toolbox, and New Contractor Gun, 6.4 mm x 15 m BlueMax II Airless Hose,RAC X 517 Tip and GuardEasy Out Pump Filter• Filtering reduces tip clogsand ensures a quality finish• Easy Out design filters fromthe inside out – so filters won’tget stuck or collapse when dirty• Filter removes with the cap for less messHand removable inlet tube.Brushless DC motor with Lifetime Warranty.Watchdog Pump Protection Systemprevents dry pumping damage.9

Ultra Max II 1095The Ultra Max II 1095 is ideal forcommercial and industrial contractorswho routinely spray with multiple guns,long hoses and the toughest coatings.High output and reliable performancemake the Ultra Max II 1095 the choice oflarge professional contractors worldwide.Proven Endurance Pump• Exclusive ProConnect system allows quickchange-out of pumps – no tools required• Long-life V-Max Blue Packings, Chromex Rod,and Hardened Stainless Steel cylinder• QuikAccess intake valve to easily cleanor clear debrisSmartControl 2.0Pressure Control• Advanced microprocessor control deliversGraco’s most consistent spray fanat all spraying pressures• Zero deadband at lower sprayingpressures makes the 1095 idealfor fine finish spraying• WatchDog system automatically shuts off sprayerwhen bucket is empty to prevent damageExclusive Brushless DC Motor• Compact, lightweight motor delivershigher horsepower per wall amp• No brushes to replace• Enclosed design protects internal motorcomponents from dirt, dust and oversprayto extend motor lifePremium Unit ShownDESCRIPTION PART NUMBER MAX TIP SIZE MAX LPM MAX PSIUltra Max II 1095 Hi-Boy 249688 .033–1 gun, .025–2 guns, .019–3 guns 4.1 3300Comes complete with Digital Display, AutoClean2 ,Toolbox, and New Contractor Gun, 6.4 mm x 15 m BlueMax II Airless Hose,RAC X 517 Tip and GuardChrome Plated,Welded Steel Hi-Boy Cart• Hose wrap with retractable handle• TiltBack cart design• Lift handles offer convenient grab points• Tubed pneumatic wheels roll easilyon all surfacesEasy Out Pump Filter• Filtering reduces tip clogsand ensures a quality finish• Easy Out design filters fromthe inside out – so filters won’tget stuck or collapse when dirty• Filter removes with the cap for less messBrushless DC motor with totallyenclosed design.10Exclusive ProConnect System - no-toolspump removal for fast repairs on the job.Watchdog Pump Protection Systemprevents dry pumping damage.

The Mark V is Graco’s largest electricairless/texture sprayer. It's job-proventexture capabilities enable it to spray skimcoat in a Level 5 finish, and drywall mudin an orange peel, splatter, or knockdownfinish. It can even airless spray a widerange of primers and paints.TexSpray Mark VProven Endurance Pump• Oversized clearances ensure minimalpressure drop and surge-free performance• Long-life Chromex Pump Rod and V-MaxBlue PackingsSpecially Designed, SubmergedFoot Valve• Uniquely designed with Max Flo fluidpassages and large ball check to efficientlyload thick and heavy materials• Foot valve is placed low to the ground,submerging it in the material bucketExclusive ProConnect System• No-tools removal and installation for fastrepairs, right on the job• No-tool paint line connectionSmartControl 2.0Pressure Control• Precise spray-pressure control throughthe full range – from 400 psi to 3300 psi• Higher spray pressures give you the powerto spray tough coatings and run longhose lengthsExclusive Brushless DC Motor• Compact, lightweight motor delivers higherhorsepower per wall amp• No brushes to replace• Enclosed design protects internal motorcomponents from dirt, dust and oversprayto extend motor lifeChrome-Plated, Welded-SteelHi-Boy Cart• Hose rack with retractable handle• Tilt-back cart design• Lift handles provide convenientgrab points• Tubed pneumatic wheels roll easily on all surfacesDESCRIPTION PART NUMBER MAX TIP SIZE MAX LPM MAX PSIMark V 249907 .037 4.7 3300Comes complete with 9.5 mm x 15 m hose, 6.4 mm x .9 m Whip Hose, HD Texture Gun, GHD 427 and 531 TipsProConnect, no-tools pump removalsystem.Built-in kickstand for convenientbucket changes.Airless spray skim coat in a Level 5 finish.11

FinishPro 390Air-Assisted Airless SprayerIntroducing Graco’s newest solution tofine finishing! The FinishPro 390offers a high-quality fine finish ata high production rate.True 2-in-1 Capability• In the air-assisted airless mode theon-board air compressor assists the pumpin producing a high quality fine finish atlower pressures• Able to support up to a .020 tip inairless modePremium G40 Air-Assist Gunwith RAC X SwitchTips • All new ‘optimized’ air cap utilizes 8 airpassages to deliver air closer to thetip – resulting in a softer, more consistentpattern from start to finish• Lightweight, compact design is idealfor getting into tight areas• Ultra light trigger pull and form-fittedhandle means less fatigue for the user• Air adjustment valve convenientlylocated right at the gun• Graco’s fine finish tips providea superior spray finish• Reversible tips allow for easy clearingof clogged tips – no need to disassemblethe gun• Switching tips is simple – ideal whenmoving from trim to doorsProven Endurance Pump• Piston pump allows for consistent primingand pumping of even the heaviest materials• Long-life V-Max Blue Packings, Chromex Rodand Stainless Steel Cylinder• Proven design and rugged constructionDESCRIPTION PART NUMBER MAX TIP SIZE MAX LPM MAX PSIFinishPro 390 255116 0.021 1.8 2600Includes: G40 Gun, 5.7 Liter suction tube, RAC X FFT210, LTX517, 4.8 mm x 15 m BlueMax II 3300-psi Hose, 9.5 mm x 15 m air hoseLightweight, Compact Design• Welded, durable, chromed frame is lightenough for one person to handle• Retractable handle allows for easymovement and compact storage• Hose wrap holds up to 30 m of airand fluid hoseCustomized, Long-LifeAir Compressor• Quiet twin cylinder design• Produces 3.2 cfm @ 35 psiOne-gallon direct suction tube is idealfor small jobs and touch-up work.12Simple, color-coded labels easily identifyair-assisted mode.Exclusive FlexCoil air hose designprovides exceptional maneuverabilityand control at gun.

Graco’s premier solution to fine finishing!The FinishPro 395 offers a high-qualityfine finish at a high production rate whilehandling the most challenging materials.FinishPro 395Air-Assisted Airless SprayerTrue 2-in-1 Capability• In the air-assisted airless mode theon-board air compressor assists the pumpin producing a high quality fine finish atlower pressures• Able to support up to a .021 tip inairless modePremium G40 Air-Assist Gunwith RAC X SwitchTips• All new ‘optimized’ air cap utilizes 8 airpassages to deliver air closer to thetip – resulting in a softer, more consistentpattern from start to finish• Lightweight, compact design is idealfor getting into tight areas• Ultra light trigger pull and form-fitted handlemeans less fatigue for the user• Air adjustment valve convenientlylocated right at the gun• Graco’s fine finish tips provide asuperior spray finish• Reversible tips allow for easy clearing ofclogged tips – no need to disassemble the gun• Switching tips is simple – ideal when movingfrom trim to doorsSmartControl 1.0 withDigital Display• Microprocessor control delivers a consistentspray pattern without pressure fluctuationsat all pressures• Tight deadband and fast response when spraying• Digital Display accurately displaysspraying pressureProven Endurance Pump• Piston pump allows for consistent priming andpumping of even the heaviest materials• Long-life V-Max Blue Packings, Chromex Rodand Stainless Steel Cylinder• Proven design and rugged constructionDESCRIPTION PART NUMBER MAX TIP SIZE MAX LPM MAX PSIFinishPro 395 255117 0.023 2.0 3300Includes: G40 Gun, RAC X FFT210, LTX517, 4.8 mm x 15 m BlueMax II 3300 psi Hose, 9.5 mm x 15 m air hoseCustomized, Long-LifeAir Compressor• Quiet twin cylinder design• Produces 3.2 cfm @ 35 psiMicroprocessor delivers the mostconsistent spray fan.On-board air regulator and gauge allowfor precise air control and repeatablefinishes.Exclusive FlexCoil air hose designprovides exceptional maneuverabilityand control at gun.13

New Contractor & FTx Exclusive FlexSeal TotallyEnclosed NeedleDesign (patent-pending)• Revolutionary needle designhas no exposure to paintresulting in 70% longer life!• Fluid pressure in the gunpushes on the FlexSeal toquickly shut-off needle.• Needle is completelyenclosed – paint nolonger contacts theneedle, reducing wear.Exclusive New FlexSeal GunsDesignIntroducing breakthrough needle designtechnology that protects the needlefrom paint, preventing wear and gunspitting – making the New Contractorand FTx Guns our longest lasting, mostreliable guns! You’ll get the maximumperformance, reliability and comfort thatyou’ve come to expect from Graco.Consistent Needle Shut-Off• Spring is outside of the fluid path toeliminate pack out and slow needleshut-off.Ergonomic Gun Handle• New Contractor gun’s form-fittedhandle maximizes operatorcontrol and comfort.Reduced Gun Spitting• Seat has been re-positioned closer tothe tip, 60% “dead space” eliminated.• Reduced amount of paint left betweenneedle and tip for less spitting on nexttrigger pull.• FlexSeal ensures quick shut-off.Durable Nickel Finish• Premium nickel finish is corrosionresistant and easier to clean.Graco vs Other Industry-Standard Needle DesignsGraco’s FlexSeal Totally Enclosed Needle DesignPaint Flows on the Seal - Protecting NeedleOther Industry Standard Gun Needle DesignsPaint Flows Directly On NeedleCompletely Enclosed NeedleMoves In & OutExposed Needle Moves In & OutStaticSealPaint Flows on the Seal - Protecting NeedlePaint Flows Directly On Needle14Needle is completely enclosed by the FlexSeal to provide consistent and quick shut-off,reducing spitting.Paint flows directly on needle that moves in and out of a static seal – resulting in needlewear with every trigger pull.

AccessoriesEssential Tools For Maximum Productivity and PerformanceAIRLESS GUNS288420288425288421288430288429288431246240246468287023287024GUN HOSE KITS288489288496288490288493288497287095287041287042287043BLUEMAX II AIRLESS HOSE238358238959240793240794240797New Contractor Gun (2-finger trigger) with RAC X 517 Tip and GuardNew Contractor Gun (4-finger trigger) with RAC X 517 Tip and GuardNew Contractor Gun (2-finger trigger) with RAC 5 517 Tip and GuardNew FTx Gun (4-finger trigger) with RAC X 515 Tip and GuardNew FTx Gun (2-finger trigger) with RAC X 515 Tip and GuardNew FTx Gun (4-finger trigger) with RAC 5 515 Tip and GuardSilver Plus Gun with RAC X 517 Tip and GuardFlex Plus Gun with RAC X 517 Tip and Guard.9 m Pole Gun with Contractor Inline valve, CleanShot valve, RAC X Tip and Guard1.8 m Pole Gun with Contractor Inline valve, CleanShot valve, RAC X Tip and GuardKits include the following unless otherwise noted:Airless Gun, RAC X 517 Tip and Guard,6.4 mm x 15 m BlueMax II 3300 psi Airless Hose and .9 m Whip Hose.New Contractor Gun Hose KitNew Contractor Gun Hose Kit with RAC 5New Contractor Gun Hose Kit with 9.5 mm x 15 m BlueMax II 3300 psi Airless HoseNew FTx Gun Hose Kit RAC X 515 Tip, No Whip HoseNew FTx Gun Hose Kit with RAC 5 - 515 Tip, No Whip HoseFlex Plus Gun Hose KitSilver Plus Gun Hose KitSilver Plus Gun Hose Kit with 9.5 mm x 15 m BlueMax II 3300 psi Airless HoseSilver Plus Gun Hose Kit with 9.5 mm x 15 m BlueMax II 4000 psi Airless HoseFeel the Difference in Flexibility4.8 mm x 0.9 m BlueMax II 3300 psi Airless Whip Hose4.8 mm x 1.4 m BlueMax II 3300 psi Airless Whip Hose6.4 mm x 7.5 m BlueMax II 3300 psi Airless Hose6.4 mm x 15 m BlueMax II 3300 psi Airless Hose9.5 mm x 15 m BlueMax II 3300 psi Airless HoseFLUIDS243103245133206994206995206996Pump Armor - 1 LiterPump Armor - 3.8 LiterUse Graco’s exclusive Pump Armor for long term pump storage to prohibit harmful rust and corrosion.Throat Seal Liquid (TSL ) - .24 LiterThroat Seal Liquid (TSL) - 1 LiterThroat Seal Liquid (TSL) - 3.8 LiterProlong the life of your pump by routinely adding TSL to your pump’s wet cup.PRESSURE ROLLERS245397244279244281EvenFlow Pressure Roller Assembly with 50 cm fixed heavy duty extension and connector inline valveEvenFlow Pressure Roller Assembly with 50 cm fixed heavy duty extension, 45° angleEvenFlow Pressure Roller Assembly with 46 cm - 91 cm telescoping extensionAsk your local authorized Graco distributor for details on Graco’s complete line of airless accessories.15

RAC X SwitchTips RAC X SwitchTips are the highestperforming and longest lasting tipsin the industry! RAC X is designedto maintain a wider spray patternfor a longer period of time. A wider sprayfan means fewer passes with the gunand better productivity.Best Tip on the Market(Blue Handle)• Longest lasting fan pattern• Highest quality finishwith a consistent spray pattern• Available in the most common tip sizesEasy to Identify Tip Size• Large raised tip size numbers are always legible- even when covered with paintSuperior Tip Design• Locking tab ensures tip stayssecurely in guard• “Snaps” tip in spray or reverse position• OneSeal tip installs with no tools• Solvent seal available when usingextremely hot solventsImproved Diffuser Design• No obstructions for betterspray patterns of most fluids• Easier to cleanDESCRIPTION PART NUMBER APPLICATIONS MATERIALSRAC X LTXxxx Residential, Commercial or Industrial Lacquers to MasticsWideRAC WRxxxx High Production, New Construction Lacquers to MasticsFine Finish FFTxxx Metal, Woodwork Lacquer, Varnish, StainEnamel, Oil base paintRAC X – Fine Finish(Green Handle)• Pre-orifice design improves the overallfinish quality with finer atomizationand soft edges for overlapping• Can spray at lower pressures• Pre-orifice and diffuser design easierto clean and less likely to plug• Also includes solvent sealfor extremely hot solventsWideRAC Tips - complete jobs in half thetime. Extra wide pattern, 61 cm (24 in)(WRxxxx)16Fine Finish Tips - pre-orifice producesfiner atomization and softer edges. Highestquality finish (FFTxxx)RAC X HandTite Tip Guard -22 mm (7/8 in) thread size(246215)RAC X - WideRAC(Blue Handle)• The WideRAC covers double the area inhalf the time - increased flow rateensures the proper mil build• WideRAC tips are made for highproduction, new construction applicationswhich may require larger airless sprayers

Tip ChartsRAC X SwitchTips(LTXxxx)Fan WidthORIFICE SIZE - INCHESIN (MM) .009 .011 .013 .015 .017 .019 .021 .023 .025 .027 .029 .031 .033 .0352-4 (51-102)4-6 (102-152) 209 211 213 215 217 2196-8 (152-203) 309 311 313 315 317 319 3218-10 (203-254) 411 413 415 417 419 421 42310-12 (254-305) 511 513 515 517 519 521 523 525 527 531 53512-14 (305-356) 615 617 619 621 623 625 627 629 631 63514-16 (356-406) 721Flow Rate (gpm) .09 .12 .18 .24 .31 .38 .47 .57 .67 .77 .90 1.03 1.17 1.31Flow Rate (lpm) .33 .49 .69 .91 1.17 1.47 1.79 2.15 2.54 2.96 3.42 3.90 4.42 4.98Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rateExample: for a tip with a .015 orifice and a 6 in (152 mm) pattern, order LTX315WideRAC RAC X SwitchTips(WRxxxx)Fan WidthORIFICE SIZE - INCHESIN (MM) .021 .023 .025 .027 .029 .031 .033 .035 .037 .03924 (610) 1221 1223 1225 1227 1229 1231 1233 1235 1237 1239Flow Rate (gpm) .47 .57 .67 .77 .90 1.03 1.17 1.31 1.47 1.63Flow Rate (lpm) 1.79 2.15 2.54 2.96 3.42 3.90 4.42 4.98 5.56 6.18Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rateExample: for a tip with a .027 orifice and a 24 in (610 mm) pattern, order WR1227Fine Finish RAC X SwitchTipsORIFICE SIZE - INCHES(FFTxxx)IN (MM) .008 .010 .012 .0144-6 (102-152) 208 210 212 2146-8 (152-203) 308 310 312 3148-10 (203-254) 410 412 41410-12 (254-305) 510 512 51412-14 (305-356) 612 614Flow Rate (gpm) .07 .11 .15 .21Flow Rate (lpm) .26 .41 .59 .80Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rateExample: for a tip with a .010 orifice and a 8 in (203 mm) pattern, order FFT410Fan WidthRAC 5 SwitchTips(286xxx)Fan WidthORIFICE SIZE - INCHESIN (MM) .007 .009 .011 .013 .015 .017 .019 .021 .023 .025 .027 .029 .031 .033 .035 .039 .043 .045 .051 .055 .063 .0652-4 (51-102) 109 111 113 115 119 1214-6 (102-152) 207 209 211 213 215 217 219 221 223 225 2356-8 (152-203) 307 309 311 313 315 317 319 321 323 325 327 3318-10 (203-254) 409 411 413 415 417 419 421 423 425 427 429 433 435 439 443 451 45510-12 (254-305) 509 511 513 515 517 519 521 523 525 527 529 531 533 535 543 551 555 56312-14 (305-356) 609 611 613 615 617 619 621 623 625 627 629 631 633 635 645 655 66514-16 (356-406) 721 723 725 729 73516-18 (406-457) 815 817 819 821 827 831 833 83518-20 (457-508) 917 935Flow Rate (gpm) .05 .09 .12 .18 .24 .31 .38 .47 .57 .67 .77 .90 1.03 1.17 1.31 1.63 1.98 2.17 2.79 3.25 4.26 4.53Flow Rate (lpm) .20 .33 .49 .69 .91 1.17 1.47 1.79 2.15 2.54 2.96 3.42 3.90 4.42 4.98 6.18 7.51 8.23 10.57 12.29 16.13 17.17Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rateExample: for a tip with a .011 orifice and a 6 in (152 mm) pattern, order 286311Contractor Flat Tips(269xxx)Fan WidthORIFICE SIZE - INCHESIN (MM) .011 .013 .015 .017 .019 .021 .023 .025 .027 .029 .031 .0354-6 (102-152) 211 213 215 217 219 225 2276-8 (152-203) 311 313 315 317 319 321 323 325 3278-10 (203-254) 411 413 415 417 419 421 423 425 427 43510-12 (254-305) 511 513 515 517 519 521 523 525 527 53112-14 (305-356) 613 615 617 619 621 623 625 627 631 63514-16 (356-406) 715 717 719 721 72516-18 (406-457) 815 819 821 827 829 83118-20 (457-508) 925Flow Rate (gpm) .12 .18 .24 .31 .38 .47 .57 .67 .74 .90 1.03 1.31Flow Rate (lpm) .49 .69 .91 1.17 1.47 1.79 2.15 2.54 2.96 3.42 3.90 4.98Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rateExample: for a tip with a 0.011 in orifice and a 10 in (254 mm) pattern, order 26951117

AccessoriesGenuine Graco — The Key to Ultimate Flexibility and Superior OutputACCESSORIES FOR 390 THRU 595HOPPER288526 Hopper Accessory5.7 Liter molded hopper attaches to sprayer in place of inlet suction hose without tools.Ideal for spraying small amounts of material. Lid included. Smooth inside cleans up fast.Now works with Stand, Hi-Boy and Lo-Boy units.FILTERS AND STRAINERS246425246384246382246383Easy Out Filters, Short, Gray, 30 meshEasy Out Filters, Short, Black, 60 meshEasy Out Filters, Short, Blue, 100 meshEasy Out Filters, Short, Red, 200 mesh246385 Inlet StrainerSUCTION HOSE KITSACCESSORIES FOR 695 THRU 1095248317 208 Liter Suction Hose KitEasily installs on any sprayer to provide the convenience of a flexible inlet hose. Leave tube long(fits 114 Liter trash cans and 208 Liter drums) or simply unscrew at middle fitting to shorten (fits 18.9 Liter buckets).FILTERS AND STRAINERS244071244067244068244069Easy Out Filters, Long, Gray, 30 meshEasy Out Filters, Long, Black, 60 meshEasy Out Filters, Long, Blue, 100 meshEasy Out Filters, Long, Red, 200 mesh189920 Inlet Strainer18Ask your local authorized Graco distributor for details on Graco’s complete line of airless accessories.

WarrantyWe stand behind everypiece of equipmentwe manufacture with oneof the industries strongestwarranties. Spray with theconfidence that you willprobably never needto use Graco’s warranty,but if you do...we will be there.Lifetime Electric Motor WarrantyIf the Motor fails under normal use, we’ll replace it under warrantyfor the original owner for the life of the sprayer.Lifetime Drive WarrantyIf the Drive Train fails from normal use, we’ll replace it under warrantyfor the original owner for the life of the sprayer.2-Year WarrantyCoverage against defects in materials and workmanship on the entire sprayer.Convenient ServiceGraco offers many authorized distributor locations in Australia/New Zealandfor service and repair19

Electric Product Specifications390Ultra 395Ultra Max II 490Ultra Max II 495Ultra Max II 595Max Tip: .021Max Tip: .023Max Tip: .023Max Tip: .025Max Tip: .027Max psi: 3300Max psi: 3300Max psi: 3300Max psi: 3300Max psi: 3300Max lpm: 1.8Max lpm: 2.0Max lpm: 2.0Max lpm: 2.3Max lpm: 2.6Weight kg: 13.6 StandWeight kg: 19 StandWeight kg: 15 StandWeight kg: 19.5 StandWeight kg: 32.7 Hi-BoyMotor hp: 5/8 hp DCMax Ext. Cord Support:• Up to 90 m of Min. 14 gauge3-wire extension cordGenerator Requirements:• 3000WGun:• FTx Airless GunHose:• 6.4 mm x 15 mBlueMax II 3300 psiTip:• RAC X 515 Tip and GuardInlet Strainer:• Part #246385Pump Filter:• Includes Easy OutPump FilterEasy Out Filter Screens:• 30 Mesh - 246425• 60 Mesh - 246384• 100 Mesh - 246382• 200 Mesh - 246383Sprayer Dimensions:• Stand - 19”x18”x16”• Hi-Boy - NA• Lo-Boy - NAWear Parts:• Packing Kit - 244194• Rod - 249125• Cylinder - 243176Complete Pump Lower:• Part #249127Manuals:• Operation - 310820• Repair - 310824• Pump - 309250• Gun - 309639• Parts List - 310876Motor hp: 7/8 hp TEFC DCMax Ext. Cord Support:• Up to 90 m of Min. 14 gauge3-wire extension cordGenerator Requirements:• 3000WGun:• FTx Airless GunHose:• 6.4 mm x 15 mBlueMax II 3300 psiTip:• RAC X 515 Tip and GuardInlet Strainer:• Part #246385Pump Filter:• Includes Easy OutPump FilterEasy Out Filter Screens:• 30 Mesh - 246425• 60 Mesh - 246384• 100 Mesh - 246382• 200 Mesh - 246383Sprayer Dimensions:• Stand - 19”x18”x16”• Hi-Boy - N/A• Lo-Boy - N/AWear Parts:• Packing Kit - 244194• Rod - 249125• Cylinder - 243176Complete Pump Lower:• Part #246428Manuals:• Operation - 309665• Repair - 309674• Pump - 309250• Gun - 309639• Parts List - 309675Motor hp: 1 hp Brushless DCMax Ext. Cord Support:• Up to 90 m of Min. 14 gauge3-wire extension cordGenerator Requirements:• 3000WGun:• FTx Airless GunHose:• 6.4 mm x 15 mBlueMax II 3300 psiTip:• RAC X 515 Tip and GuardInlet Strainer:• Part #246385Pump Filter:• Includes Easy OutPump FilterEasy Out Filter Screens:• 30 Mesh- 246425• 60 Mesh- 246384• 100 Mesh- 246382• 200 Mesh- 246383Sprayer Dimensions:• Stand- 19”x18”x16”• Hi-Boy- N/A• Lo-Boy- N/AWear Parts:• Packing Kit- 244194• Rod- 249125• Cylinder- 243176Complete Pump Lower:• Part #246428Manuals:• Operation- 309665• Repair- 309674• Pump- 309250• Gun- 309639• Parts List- 309675Motor hp: 1.2 hp Brushless DCMax Ext. Cord Support:• Up to 90 m of Min. 14 gauge3-wire extension cordGenerator Requirements:• 3000WGun:• FTx Airless GunHose:• 6.4 mm x 15 mBlueMax II 3300 psiTip:• RAC X 515 Tip and GuardInlet Strainer:• Part #246385Pump Filter:• Includes Easy OutPump FilterEasy Out Filter Screens:• 30 Mesh- 246425• 60 Mesh- 246384• 100 Mesh- 246382• 200 Mesh- 246383Sprayer Dimensions:• Stand- 16”x14”x19”• Hi-Boy- 30”x25”x26”• Lo-Boy- 26”x14”x21”Wear Parts:• Packing Kit- 244194• Rod- 249125• Cylinder- 243176Complete Pump Lower:• Part #246428Manuals:• Operation- 309665• Repair- 309674• Pump- 309250• Gun- 309639• Parts List- 309675Motor hp: 1.4 hp Brushless DCMax Ext. Cord Support:• Up to 90 m of Min. 14 gauge3-wire extension cordGenerator Requirements:• 3000WGun:• FTx Airless GunHose:• 6.4 mm x 15 mBlueMax II 3300 psiTip:• RAC X 515 Tip and GuardInlet Strainer:• Part #246385Pump Filter:• Includes Easy OutPump FilterEasy Out Filter Screens:• 30 Mesh- 246425• 60 Mesh- 246384• 100 Mesh- 246382• 200 Mesh- 246383Sprayer Dimensions:• NA• Hi-Boy- 30”x25”x26”• Lo-Boy- 26”x14”x21”Wear Parts:• Packing Kit- 244194• Rod- 249125• Cylinder- 243176Complete Pump Lower:• Part #246428Manuals:• Operation- 309665• Repair- 309674• Pump- 309250• Gun- 309639• Parts List- 30967520

Electric Product SpecificationsUltra Max II 695Ultra Max II 795Ultra Max II 1095TexSpray Mark VFinishPro 390FinishPro 395Max Tip: .029Max psi: 3300Max lpm: 3.0Weight kg: 42 Hi-BoyMotor hp: 1.75 hp Brushless DCMax Ext. Cord Support:• Up to 90 m of Min. 12 gauge3-wire extension cordGenerator Requirements:• 5000WIncludes:• Premium includes: DigitalDisplay,AutoClean2,Tool Box,Contractor Gun,RAC X 517 Tip & Guard,6.4 mm x 15 m BlueMax IIAirless HoseInlet Strainer:• Part #189920Pump Filter:• Includes Easy OutPump FilterEasy Out Filter Screens:• 30 Mesh- 244071• 60 Mesh- 244067• 100 Mesh- 244068• 200 Mesh- 244069Sprayer Dimensions:• Hi-Boy- 92 x 66 x 76 cm• Lo-Boy- 66 x 36 x 53 cmWear Parts:• Packing Kit- 248212• Rod- 248206• Sleeve- 248209Complete Pump Lower:• Part #248204Manuals:• Operation- 311360• Repair- 311365• Pump- 310643• Gun- 309639• Parts List- 311362Max Tip: .031Max psi: 3300Max lpm: 3.6Weight kg: 42 Hi-BoyMotor hp: 2.0 hp Brushless DCMax Ext. Cord Support:• Up to 90 m of Min. 12 gauge3-wire extension cordGenerator Requirements:• 5000WIncludes:• Premium includes: DigitalDisplay,AutoClean2,Tool Box,Contractor Gun,RAC X 517 Tip & Guard,6.4 mm x 15 m BlueMax IIAirless HoseInlet Strainer:• Part #189920Pump Filter:• Includes Easy OutPump FilterEasy Out Filter Screens:• 30 Mesh- 244071• 60 Mesh- 244067• 100 Mesh- 244068• 200 Mesh- 244069Sprayer Dimensions:• Hi-Boy- 92 x 66 x 76 cm• Lo-Boy- 66 x 36 x 53 cmWear Parts:• Packing Kit- 248212• Rod- 248206• Sleeve- 248209Complete Pump Lower:• Part #248204Manuals:• Operation- 311360• Repair- 311365• Pump- 310643• Gun- 309639• Parts List- 311362Max Tip: .033Max psi: 3300Max lpm: 4.1Weight kg: 55 Hi-BoyMotor hp: 2.2 hp Brushless DCMax Ext. Cord Support:• Up to 90 m of Min. 12 gauge3-wire extension cordGenerator Requirements:• 5000WIncludes:• Premium includes: DigitalDisplay,AutoClean2,Tool Box,Contractor Gun,RAC X 517 Tip & Guard,6.4 mm x 15 m BlueMax IIAirless HoseInlet Strainer:• Part #189920Pump Filter:• Includes Easy OutPump FilterEasy Out Filter Screens:• 30 Mesh- 244071• 60 Mesh- 244067• 100 Mesh- 244068• 200 Mesh- 244069Sprayer Dimensions:• Hi-Boy- 97 x 76 x 64 cmWear Parts:• Packing Kit- 248213• Rod- 248207• Sleeve- 248210Complete Pump Lower:• Part #287513Manuals:• Operation- 311360• Repair- 311365• Pump- 310894• Gun- 309639• Parts List- 311362Tips/Discs Suppliedwith Trigger Gun:• 427 and 531Reversible Spray TipsMax Working Pressure:• 3300 psiMax Delivery Rating:• 4.7 LpmMax Tip: .037Max Hose*: 90 mMotor hp:• Industrial Grade 2.5 hp, DCCompressor Air Output:• User supplied air compressorand optional Air Atomizer Kitreqired for some texturefinishesWeight kg: 55Sprayer Dimensions:• 56 W x 62 L x 81 H (cm)Manuals:• Operation - 311360• Repair - 311365 / 311362Materials Sprayed:• Oil-based coatings,enamels, latex, blockfillers,elastomerics,epoxies,drywall mud and otherhigh-build materialsTypical Applications:• Medium to largeresidential and commercialinterior and exterior* Hose length is heavily dependenton material viscosityMax Tip: .021Max psi: 2600Max lpm: 1. 8Pump Motor hp: 5/8 hp DCCompressor Motor hp: 1 hp ACCompressor Air Output:• 3.2 cfm @ 35 psiWeight kg: 35Max Ext. Cord Support:• Up to 90 m of Min. 14 gauge3-wire extension cordGun:• G40 Air-Assisted GunHose (Bonded):• 4.8 mm x 15 mBlueMax II 3300• 9.5 mm x 15 m air hoseTips:• RAC X FFT210, LTX517Inlet Strainer:• Part #246385Pump Filter:• 100 mesh Easy Out filterSprayer Dimensions (WLH):• Lo-Boy - 56 x 71 x 64 cmWear Parts:• Packing Kit - 244194• Rod - 249125• Cylinder - 243176Complete Pump Lower:• Part #249127Manuals:• Operation - 311905• Repair - 311911• Pump - 309250• Gun - 311937Max Tip: .023Max psi: 3300Max lpm: 2.0Pump Motor hp: 7/8 hp TEFC DCCompressor Motor hp: 1 hp ACCompressor Air Output:• 3.2 cfm @ 35 psiWeight kg: 43Max Ext. Cord Support:• Up to 90 m of Min. 14 gauge3-wire extension cordGun:• G40 Air-Assisted GunHose (Bonded):• 4.8 mm x 15 mBlueMax II 3300 psi• 9.5 mm x 15 m air hoseTips:• RAC X FFT210, LTX517Inlet Strainer:• Part #246385Pump Filter:• 100 mesh Easy Out filterSprayer Dimensions (WLH):• Hi-Boy - 58 x71 x 8 cmWear Parts:• Packing Kit - 244194• Rod - 249125• Cylinder - 243176Complete Pump Lower:• Part #246428Manuals:• Operation - 311905• Repair - 311911• Pump - 309250• Gun - 31193721

ABOUT GRACOFounded in 1926, Graco is a world leader in fluid handling systems and components. Graco productsmove, measure, control, dispense and apply a wide range of fluids and viscous materials usedin vehicle lubrication, commercial and industrial settings.The company’s success is based on its unwavering commitment to technical excellence, world-classmanufacturing and unparalleled customer service. Working closely with qualified distributors, Gracooffers systems, products and technology that set the quality standard in a wide range of fluid handlingsolutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,and dispensing sealants and adhesives, along with power application equipment for the contractorindustry. Graco’s ongoing investment in fluid management and control will continue to provideinnovative solutions to a diverse global market.GRACO LOCATIONSCONTACTMAILING ADDRESSP.O. Box 1441Minneapolis, MN 55440-1441Tel: 612.623.6000Fax: 612.623.6777AMERICASMINNESOTAWorldwide HeadquartersGraco Inc.88-11th Avenue N.E.Minneapolis, MN 55413EUROPEBELGIUMEuropean HeadquartersGraco N.V.Industrieterrein-Oude BundersSlakweidestraat 313630 Maasmechelen,BelgiumTel: 32.89.770.700Fax: 32.89.770.777ASIA PACIFICJAPANGraco K.K.1-27-12 HayabuchiTsuzuki-kuYokohama City, Japan 2240025Tel: 81.45.593.7300Fax: 81.45.593.7301ASIA PACIFICCHINAGraco Hong Kong Ltd.Representative OfficeRoom 118 1st FloorNo.2 Xin Yuan BuildingNo.509 Cao Bao RoadShanghai, P.R. China 200233Tel: 86.21.649.50088Fax: 86.21.649.50077ASIA PACIFICKOREAGraco Korea Inc.Choheung Bank Building4th Floor #1599Gwanyang-Dong, Dongan-Ku,Anyang-Si, Gyunggi-Do,Korea 431-060Tel: 82(Korea).31.476.9400Fax: 82(Korea).31.476.9801SALES/DISTRIBUTION/SERVICEAll written and visual data contained in this document are based on the latest product information available at the time of publication.Graco reserves the right to make changes at any time without notice.Graco Inc. is registered to I.S. EN ISO 9001North America800-690-2894FAX 800-334-6955WWW.GRACO.COMGRACO INC.P.O. Box 1441Minneapolis, MN 55440-1441©2006 Graco Inc. 337659 Rev. B 1/07 Printed in U.S.A.All other brand names or marks are used for identification purposes and are trademarks of their respective owners.Blue is a trademark of Graco Inc. for Contractor Equipment Sprayers.