1 Ultrasonic sensor UC2000-30GM-IU-V1 - Elec.ru

Ultrasonic sensorUC2000-30GM-IU-V1Model NumberUC2000-30GM-IU-V1Single head systemFeatures• Analog current and voltage output• 12 bit D/A transducer• Evaluation limits can be taught-in• Temperature compensation• Compact design• Plug connectionDiagramsCharacteristic response curveTechnical dataGeneral specificationsSensing rangeUnusable areaStandard target plateTransducer frequencyResponse delayIndicators/operating meansLED yellowLED red/greenElectrical specificationsOperating voltage U BPower consumption P 0OutputOutput typeResolutionDeviation of the characteristic curveRepeat accuracyLoad impedanceTemperature influence200 ... 2000 mm0 ... 200 mm100 mm x 100 mmapprox. 175 kHz≤ 100 mssolid yellow: object in the evaluation rangeyellow, flashing: program function evaluation limits, slopesolid green: Power on green, flashing: program function,object detected solid red: Connector removed red, flashing:error, program function object not detected10 ... 30 V DC , ripple 10 % SS≤ 800 mW1 current output 4 ... 20 mA1 voltage output 0 ... 10 Vdepending on the set evaluation range:0.172 mm , if evaluation range < 705 mm ,evaluation range [mm] / 4096, if evaluation range > 705 mm≤ 0.2 % of full-scale value≤ 0.1 % of full-scale valuecurrent output: ≤ 500 OhmVoltage output: ≥ 1000 Ohm< 2 % of full-scale value (≤ 0.2 % / K without temperaturecompensation)Standard conformityStandards EN 60947-5-2Ambient conditionsAmbient temperature-25 ... 70 °C (-13 ... 158 °F)Storage temperature-40 ... 85 °C (-40 ... 185 °F)Mechanical specificationsConnection typeConnector M12 x 1 , 4-pinProtection degreeIP65MaterialHousingHigh grade stainless steelTransducerepoxy resin/hollow glass sphere mixture; foampolyurethane, cover PBTMass175 gDimensionsM30x1.5Distance Y [m]0.60.450.20.0-0.22136-0.4114-0.6Release date: 2013-02-26 15:42 Date of issue: 2013-02-26 030410_eng.xml-0.80.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0YDistance X [m]XCurve 1: flat surface 100 mm x 100 mmCurve 2: round bar, Ø 25 mmLEDTemperature probeCoded plug2227.5Subject to reasonable modifications due to technical advances.Copyright Pepperl+Fuchs, Printed in GermanyPepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com 1

Ultrasonic sensorUC2000-30GM-IU-V1Electrical ConnectionStandard symbol/Connection:(version IU)U1 (BN)4 (BK)2 (WH)3 (BU)+ U B4-20 mA0-10 V- U BCore colours in accordance with EN 60947-5-2.Additional InformationProgrammed analogue output functionAnalogue function1)Near distanceof evaluation4 mA/0 VFar distanceof evaluation20 mA/10 VPinout2)20 mA/10 V4 mA/0 VConnector V123 14AccessoriesBF 30Mounting flange, 30 mmBF 30-FMounting flange with dead stop, 30 mmBF 5-30Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmOMH-04Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmUVW90-M30Ultrasonic -deflectorUVW90-K30Ultrasonic -deflectorUC-30GM-PROGDA5-IU-2K-VProcess control and indication equipmentV1-G-2M-PVCCable socket, M12, 4-pin, PVC cableV1-W-2M-PVCCable socket, M12, 4-pin, PVC cableDescription of the sensor functionsThis ultrasonic sensor features a four-pole temperature/TEACH-IN plug, that can beconnected in four different positions. These have the following significance.Plug positionA1A2E2/E3TMeaningTEACH-IN evaluation limit A1TEACH-IN evaluation limit A2Switching: falling/rising rampTemperature compensationDescription of the TEACH-IN procedure- Remove temperature plug- Cut and restore supply voltage (e.g. by removing and replacing unit plug)TEACH-IN of evaluation limits A1 or A2- Set object to desired evaluation limit- Connect TEACH-IN plug in pos. A1 or A2- Green LED flashes when object detected, red LED flashes when no object detected- Pull the plug (the current object position is taught and stored when the plug is removed!!)TEACH-IN of output function- Connect TEACH-IN plug in pos. E2/E3- The yellow LED indicates the output functionE2: falling rampRelease date: 2013-02-26 15:42 Date of issue: 2013-02-26 030410_eng.xml2Subject to reasonable modifications due to technical advances.Copyright Pepperl+Fuchs, Printed in GermanyPepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com

Ultrasonic sensorUC2000-30GM-IU-V1E3: rising ramp- Pull the plug when the desired function is activated, otherwise reconnect the TEACH-IN plug in pos. E2/E3- Pull plugCompleting the TEACH-IN procedure- Connect TEACH-IN plug in pos. T. Temperature compensation is now activated.If the temperature plug has not been plugged in within 5 minutes, the sensor will return to normal mode without temperaturecompensation.Default settingA1: unusable areaA2: nominal sensing rangeMode of operation: rising rampLED DisplaysDisplays depending on position of temperature/TEACH-IN plugTEACH-IN evaluation limit A1Object detectedNo object detectedTEACH-IN evaluation limit A2Object detectedNo object detectedTEACH-IN mode of operationrising rampfalling rampNormal operationtemperature compensatedPlug pulled or shortedGreen dualLEDflashesoffflashesoffononRed dualLEDoffflashesoffflashesoffoffYellow LED Yellow LEDA1/ - \ - A2/ - / -flashesflashesoffoffflashesoffInterference (e.g. compressed air) off flashes previousstateonoffoffonoffoffflashesflashesoffflasheson/off 1) on/off 2)previousstate1) on, when object in evaluation range2) on, when object in detection rangeLED-WindowLEDyellowDual-LEDgreen/redLEDyellowMounting conditionsIf the sensor is installed in places where the operating temperature can fall below 0 °C,the BF30, BF30-F or BF 5-30 fixing clamp must be used.E2A1A2Evaluation limit 1Evaluation limit 2"Power on"/DisturbanceE3Release date: 2013-02-26 15:42 Date of issue: 2013-02-26 030410_eng.xmlSubject to reasonable modifications due to technical advances.Copyright Pepperl+Fuchs, Printed in GermanyPepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com3