Isohexane LNH - Europe

Data SheetProduct NameIssued:21-Nov-2007Isohexane LNHProduct CodeQ1215EuropeProduct CategorySpecial Boiling Point SolventsCAS Registry Number 64742-49-0EINECS Number 265-151-9DescriptionTypical PropertiesIsohexane LNH is a narrow boiling range, C6 hydrocarbon solvent with an-hexane content of less than 3.5%. Being made from hydrogenatedfeedstock, its aromatics and olefins content is very low.Property Unit Method ValueDensity @15°C kg/l ASTM D4052 0.665Cubic Expansion Coefficient @20°C (10^-4)/°C Calculated 14Refractive Index @20°C - ASTM D1218 1.375Color Saybolt ASTM D156 +30Bromine Index mg Br/100g ASTM D1492 < 5Doctor Test - ASTM D235 NegativeNon Volatile Matter mg/100ml ASTM D1353 < 1Distillation, IBP °C ASTM D1078 59Distillation, DP °C ASTM D1078 63Relative Evaporation Rate (nBuAc=1) - ASTM D3539 9.4Relative Evaporation Rate (Ether=1) - DIN 53170 1.2Antoine Constant A # kPa, °C - 7.68550Antoine Constant B # kPa, °C - 2322.21Antoine Constant C # kPa, °C - 349.11Antoine Constants: Temperature range °C - 0 to +55Vapor Pressure @0°C kPa Calculated 11Vapor Pressure @20°C kPa Calculated 25Saturated Vapor Concentration @20°C g/m³ Calculated 875n-Paraffins % m/m GC 3Isoparaffins % m/m GC 92Paraffins % m/m GC 95Naphthenes % m/m GC 5Aromatics mg/kg SMS 2728 < 5

Benzene mg/kg GC < 3n-Hexane % m/m GC 3Sulfur mg/kg SMS 1897 < 0.5Flash Point °C IP 170 -47Auto Ignition Temperature °C ASTM E659 405Explosion Limit: Lower %v/v - 1.0Explosion Limit: Upper %v/v - 7.4Electrical Conductivity @20°C pS/m - < 1Aniline Point °C ASTM D611 70Kauri-Butanol Value - ASTM D1133 30Pour Point °C ASTM D97 < -50Surface Tension @20°C mN/m Du Nouy ring 17Viscosity @25°C mm²/s ASTM D445 0.45Hildebrand Solubility Parameter (cal/cm³)^½ - 7.2Hydrogen Bonding Index - - 0Fractional Polarity - - 0Heat of Vaporization @Tboil kJ/kg - 324Heat of Combustion (Net) @25°C kJ/kg - 46000Specific Heat @20°C kJ/kg/°C - 2.2Thermal Conductivity @20°C W/m/°C - 0.12Molecular Weight g/mol Calculated 86(#) In the Antoine temperature range, the vapor pressure P (kPa) at temperature T (°C)can be calculated by means of the Antoine equation: log P = A - B/(T+C)Test MethodsCopies of copyrighted test methods can be obtained from the issuing organisations:American Society for Testing and Materials (ASTM)Energy Institute (IP)Deutsches Institut für Normung (DIN): www.astm.org: www.energyinst.org.uk: www.din.deShell Method Series (SMS) methods are issued by Shell Golabl SolutionsInternational B.V., Shell Research and Technology Centre, Amsterdam, TheNetherlands. Copies of SMS can be obtained through your local Shell Chemicalscompany.For routine quality control analyses, local test methods may be applied that aredifferent from those mentioned in this datasheet. Such methods have been validatedand can be obtained through your local Shell Chemicals company.QualityHazardInformationStorage andHandlingIsohexane LNH does not contain detectable quantities of polycyclic aromatics, heavymetals or chlorinated compounds.For detailed Hazard Information please refer to the Material Safety Data Sheet onwww.shell.com/chemicals.Provided proper storage and handling precautions are taken we would expectIsohexane LNH to be technically stable for at least 12 months. For detailed adviceon Storage and Handling please refer to the Material Safety Data Sheet onwww.shell.com/chemicals.

WarrantyAll products purchased or supplied by Shell Chemicals are subject to terms andconditions set out in the contract, order acknowledgment and/or bill of lading. ShellChemicals warrant that their product will meet those specifications designated assuch herein or in other publications. All other information including that herein,supplied by Shell Chemicals is considered accurate but is furnished upon the expresscondition that the customer shall make its own assessment to determine the products'suitability for a particular purpose. Shell Chemicals make no other warranty eitherexpressed or implied, regarding such other information, the data upon which thesame is based, or the results to be obtained from use thereof; that any products shallbe merchantable or fit for any purpose; or that the use of such other information orproduct will not infringe any patent.The expression ‘Shell Chemicals’ refers to the companies of the Shell Group that areengaged in chemical businesses. Each of the companies that make up the ShellGroup of companies is an independent entity and has its own separate identity.