Download - Nivelco Process Control Co., Inc.

MultiCONT P-200 multichannel process controllerThe sum of relays in UNICONT PJK-100 extensionmodules and MultiCONT must not exceed 64, the sum ofanalogue outputs (4…20mA) must not exceed 16. Thereis a universal module with both relay and current output inthe variety of the UNICONT PJK series. The maximumnumber of these modules is 32. Programming of themodules is done by MultiCONT.Monitoring the average, minimum andmaximum value or highest values of theflow can be used only for NIVELCOmanufactured transmitters used in theflow-metering mode. Content of the internalmemory is retrievable through the USBport, within the capacity of 65000 entries.Maximal capacity of the applicable SDcard is 2GB. The devices have receivedATEX approval, so they are suitable foruse with intrinsically safe transmitters.RS 485 capable versions of MultiCONTare able to communicate withNIVELCO’s NIVISION process visualizationsoftware to indicate parameters ofa process control system graphically on aprocess controller PC.The process, the measured values or any further processedvalues can be visualized also in tabular form withNIVISION. The NIVISION performs data logging, trendmonitoring, database handling and various other tasks inaddition to a basic visualization.Another important new feature of the P-200 series is theonboard logging capability version which has an SDmemory card extension slot and an USB connector on itsfront panel. MultiCONT are able to store measurementvalues and three additional parameters of the connectedtransmitters in a measurement system into the internalFLASH memory or an SD memory card. The two modes,time-controlled and event-controlled logging modes, canbe used simultaneously.Csaba NádasdiMarketing EngineerNIVELCO Co.csnadasdi@nivelco.com19