F68V, F68Y - Standard Pneumatic - NORGREN
F68V, F68Y - Standard Pneumatic - NORGREN
F68V, F68Y - Standard Pneumatic - NORGREN
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>F68V</strong>, <strong>F68Y</strong>Olympian PlusOil vapour removal (adsorbing) filterGË ... G1Adsorbing type activated carbon element removes oilvapours and most hydrocarbon odoursLong service life of filter element. Minimum life of 400hours when an oil removal filter is installed upstreamand the filtration temperature is in the region of 20° to26°C.Oil and dirt contamination in outlet air within ISO 8573-1: Quality Class 1.7.1 when inlet air is prefiltered with anF68G and F68C/H.Technical dataFluid:Compressed airMaximum pressure:17 barOperating temperature:-20° to 65°CConsult our Technical Service for use below +2°CAir quality:Within ISO 8573-1, Class 1 (oil content) when installeddownstream of an oil removal filterMaximum remaining oil content in outlet air:0,003 mg/m 3 at 20°CMaximum flow at 6,3 bar inlet pressure to maintain stated oilremoval performance:1/2" ports: 25 dm 3 /s3/4" ports: 35 dm 3 /s1" ports: 60 dm 3 /sNominal bowl size:1 litre0,5 litreRequired pre-filter:Oil removal filter with equivalent pipe size and flow capacityequal to or greater than the vapour removal filter. It isrecommended that a general purpose filter with a 5µm elementbe installed upstream of the oil removal filter.MaterialsBody: AluminiumYoke: AluminiumBowl: AluminiumElement: Activated carbon and aluminumElastomers: Synthetic rubberOrdering informationSee Ordering Information on the followingpages.ISO SymbolsClosed bottom2/02Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.N/UK 8.260.110.01For your local Norgren Technical Sales Centre phone 0345 662266. For your local Norgren Distributor phone 0345 227777.IMI Norgren Limited, PO Box 22, Eastern Avenue, Lichfield, Staffordshire WS13 6SB
<strong>F68V</strong>, <strong>F68Y</strong>Typical performance characteristicsInlet pressure (bar)Maximum flow (dm 3 /s)<strong>F68V</strong> G1/22,5 15,7 37,84 20 486,3 25 608 28,3 67,810 31,5 75,6* Maximum flow to maintain stated oil removal performance<strong>F68Y</strong> G1<strong>F68V</strong> <strong>F68V</strong> FLOW Flow CHARACTERISTICScharacteristics<strong>F68Y</strong> Flow characteristicsPressure drop0bar0,80,60,40,2Inlet pressure: barPort size: 1/2"2,5 4,0 6,3 8,0 10,00 20 40 60 80 100 dm 3 /sPressure drop0bar d0,80,60,40,22,5 4,0 6,3 8,0 10,0Inlet pressure: barPort size: 1"0 40 80 120 160 200 dm 3 /sAir flowAir flowOrdering information Models listed include a yoke with ISO G threads, and a filter with closed bottom (no drain) bowl.Port sizeTypeModelkgG1/2 <strong>Standard</strong> flow (short element) <strong>F68V</strong>-4GN-EMA 2,33G3/4 High flow (long element) <strong>F68Y</strong>-6GN-ECA 2,61G1 High flow (long element) <strong>F68Y</strong>-8GN-ECA 2,59Alternative modelsF 6 8 ★ - ★ ★ ★ - ★ ★ ★Type<strong>Standard</strong> flow, 0,5 litre (1 pint) bowlHigh flow,1 litre (1 quart) bowlSubstituteVYElementSubstituteAdsorbing (Activated carbon without color indicator) APort sizeSubstitute1/2" 4*3/4" 61" 8NoneNBowlSubstitute0,5 litre M*1 litre C**ThreadsPTFISO Rc taperISO G parallelNoneSubstituteABGNDrainClosed bottom (no drain)SubstituteEOptionSubstituteNo optionsN* Only available with <strong>F68V</strong>. ** Only available with <strong>F68Y</strong>.N/UK 8.260.110.02Our policy is one of continued research and development. We therefore reserve the rightto amend, without notice, the specifications given in this document.2/02
<strong>F68V</strong>, <strong>F68Y</strong>AccessoriesWall mounting bracket18-001-979Dimensions0,5 litre bowl0,5 Litre (1 Pint US) Bowl343 #190 4461.19044541 Litre (1 Quart US) Bowl1 litre bowl445 #25161.† Minimum clearance required to remove bowl.# Minimum clearance required to remove bowlOur policy is one of continued research and development. We therefore reserve the right2/02 N/UK 8.260.110.03to amend, without notice, the specifications given in this document.
<strong>F68V</strong>, <strong>F68Y</strong>Bracket mountingUse 4 mm screws to mount bracket to wall.Bracket kit referenceItemTypeModelWall mounting bracket G1/2, G3/4, G1 ported yokes 18-001-9791008,5507219015190208Service kitsItemTypeModelService kit Seal & gasket 4380-302Replacement element <strong>Standard</strong> flow (<strong>F68V</strong>) 665-72Replacement element High flow (<strong>F68Y</strong>) 665-70Service kit includes element seal and bowl seal.WarningThese products are intended for use in industrial compressed airsystems only. Do not use these products where pressures andtemperatures can exceed those listed under ‘Technical Data’.Before using these products with fluids other than those specified, fornon-industrial applications, life-support systems, or other applicationsnot within published specifications, consult <strong>NORGREN</strong>.Through misuse, age, or malfunction, components used in fluid powersystems can fail in various modes.The system designer is warned to consider the failure modes of allcomponent parts used in fluid power systems and to provide adequatesafeguards to prevent personal injury or damage to equipment in theevent of such failure.System designers must provide a warning to end users in the systeminstructional manual if protection against a failure mode cannot beadequately provided.System designers and end users are cautioned to review specificwarnings found in instruction sheets packed and shipped with theseproducts.N/UK 8.260.110.04Our policy is one of continued research and development. We therefore reserve the rightto amend, without notice, the specifications given in this document.2/02
Change language