ADHESIVES and SEALANTS - Momar

ELECTRICAL FASTENERS
ADHESIVES and SEALANTS
2400°F THERMOSTEEL
Page C-14
● Strength increases with heat.
● No mixing multiple components.
● Can be sanded and machined when
cured.
● Will not rust or oxidize.
● Resistant to chemicals, and corrosion.
● Can be formed and shaped.
Part No. 811211 6
3 oz. net weight
MARINE/PLASTIC EPOXY STICK
● Cures underwater, fresh &
saltwater applications.
● Keep on board for fast emergency
or permanent repair.
● Dries white, does not shrink, is
non-yellowing and rustproof.
A single part steel cold weld product that can be used to repair cracks, holes and pits in iron & steel equipment that are
exposed to temperature up to 2400°F (1316°C). This includes exhaust manifolds, headers, catalytic converters, crossovers,
mufflers, and tail pipes on automobiles, boilers, stoves, furnaces and barbecues.
CRC MINUTE MEND EPOXY STICK
Permanently patches dings, scratches, holes
and gouges in:
● Metal Drums ● Castings
● Tanks
● Molds, and other
● Pipes
industrial equip.
● Fast, convenient, easy to use.
● Hardens in 20 minutes, cures to full strength in 24 hours.
● Bonds to damp or wet surfaces and can even be applied under water.
Part No. 811148
2 oz. Net Wt., Actual size: 3” long, 1” diameter
● Ideal for making permanent repairs
while on the road, and in remote
locations also as an emergency repair
product for the tool box, car, truck,
tractor, and shop.
● Environmentally safe to use.
Part No. 811150
4 oz. Net Wt.
7” long, 1” diameter
HI-TEMP FASTEEL EPOXY STICK
● Hands and equipment can be cleaned up
with soap and water after using.
● 95% cure at room temperature within three
hours maximum of applying. 100% cure
within 24 hours, or in 15 minutes when
heat is applied.
● Can be applied using a spatula, putty knife,
caulking gun, or by hand.
● After 45 minutes, it can be tapped, sawed, drilled, machined, stained or painted.
● USDA approved.
● Ideal for use in areas where welding is impossible.
TECHNICAL DATA: 12,000 PSI Compressive Strength 6,000 PSI Tensile Strength Color: Black after cure
Permanently repairs: Will also repair:
Excellent for:
● Engine Blocks
● Manifolds
● Exhaust Pipes
● Mufflers
● Radiators
● Gaskets
Excellent for marine or “in-water” repairs to:
● Boat Decks & Hulls
● Pools
● Spas
● Batteries
● Plastic & Metal Grilles
Part No.
811151 3
2 oz. Net Wt.
3” long, 1” diameter
● Repairs PVC pipe, fish tanks,
water tanks, tubs, gutters, seal
electric wires to electrical junction
boxes, fish boxes, battery cases,
sprinkler heads, on board fuel
tank leaks and many automotive,
appliance and household uses.
● Sinks
● Water Tanks
● Leaky Gaskets
● Gas Tanks
● Fastener Mounting Holes
Bonds tenaciously to:
● Wood
● Concrete
● Metal
Great for repairing:
● Down Spouts & Gutters ● Electrical Connections.
● Ductwork
● Hot Water Pumps
● Pipes
● Glass
● Ceramic
● Fiberglass.
● Heating
Systems
Practically
any higher
temperature
use.
● Withstands temperatures up to 500°F, more than 150° higher than other epoxies.
● Steel filled formula creates extremely tough, durable,
rock-hard bond to a wide range of metals and plastics.
● Cures in minutes - can be drilled, filed, tapped or machined in one hour.
● Simply tear off the amount required, knead until color changes completely & apply.
FAST CURE EPOXY 45
Bonds, seals, repairs door glass,
channels, trim, broken plastic grills and
cracked or broken castings.
● Contains 10 premeasured mixer cups.
● No mess, no guess, no waste.
● Bonds in 5 to 15 minutes.
● Color - grey.
Part No. 812275
10 cups: net 2g each
Permatex No. 21425
© Copyright 2010. All rights reserved.
No portion may be copied or reproduced in any manner.