Material Safety Data Sheet (91/155/EWG) Wirobond C - m-tec dental

Material Safety Data Sheet(91/155/EWG)Wirobond ® CVersion nr: 002EN valid from: 2009-04-098 Replaces version from: 2007-05-18printed: 2009-04-169. PHYSIAL AND CHEMICAL PROPERTIESForm - cylinderColour - silverOdourodourlessMelting intervall °C 1370-1420Inflammable - noOxidizing properties - noDensity g/cm³ 8,510. STABILITY AND REACTIVITYIn case of contact with acids the formation of hydrogen is possible.Dusts due to processing processes (e. g. casting, grinding) may cause in extremecases dust explosions.11. TOXICOLOGICAL INFORMATIONNo dangerous reactions are known to occur with correct handling and storage.12. ECOLOGICAL INFORMATIONNormally chemical substances, which accumulate as residual material, are specialrefuses. The removal is defined by legal waste management laws and correspondingregulations. In case of doubt contact the public authorities.Prevent penetration into soil, water and drainage systems.13. DISPOSAL CONSIDERATIONSResidual material should be recycled. Disposal according to local authorityregulationsUsed packaging may also be disposed according to local authority regulations14. TRANSPORT INFORMATIONDental alloys are no hazardous materials in the sense of transport regulations(GGVS/GGV E/RID/ADR/IMDG-Code/ICAO-TI).Page 4 of 5