WatchGuard Firebox System 4.6 User Guide

Preparing the client computers10 Click OK.11 Restart the machine.Adding a domain name to a Windows NT workstationOften remote clients need to connect to a domain behind the firewall. To do this, theremote client must be able to recognize the domains to which they belong. Adding adomain requires the installation of the Computer Browser Network Service. From theWindows NT Desktop:To install a Computer Browser Service1 Select Start => Settings => Control Panel. Double-click Network.The Network dialog box appears.2 Click the Services tab.3 Click Add.4 Select Computer Browser.5 Browse to locate the installation directory. Click OK.6 Restart the workstation.To add a new domain1 Select Start => Settings => Control Panel. Double-click Network.The Network dialog box appears.2 Click the Protocols tab.3 Select Computer Browser. Click Properties.4 Add the remote network domain name.You can add multiple domain names during the same configuration session.5 Click OK.6 Reboot the workstation.Setting up RUVPN for Windows 2000From the Windows Desktop of the client computer:1 Click Start and point to Settings. Click Dial-Up Network and Connections.2 Double-click Make New Connection.The Network Connection wizard appears.3 Select Connect to a private network through the Internet. Click Next.4 Select Automatically dial this initial connection.5 From the drop list, select Virtual Private Connection. Click Next.6 Enter the host name or IP address of the Firebox External interface. Click Next.7 Select whether the connection is for all users or only the currently logged-on user.Click Next.8 Enter a name you want to use for the new connection. WatchGuard suggests“Connect with RUVPN.” Click Finish.9 In the Initial Connection window that appears, click Yes.10 Click Properties.The Virtual Private Connection window appears.144