WatchGuard Firebox System 4.6 User Guide

Configuring debugging optionsA prompt appears so you can save the end-user configuration files when you savea configuration to the Firebox. These files must be available to the end user duringthe software client installation.• Client brochureYou can distribute the software with the end-user brochure developed byWatchGuard, located in your WatchGuard installation directory at Docs\IPSecClient Brochure.pdf.Configuring debugging optionsWatchGuard offers a selection of logging options that you can set to gatherinformation and help with future troubleshooting. Because enabling these debuggingoptions can significantly increase log message volume and have potentially adverseimpacts on Firebox performance, it is recommended that they be enabled only fortroubleshooting RUVPN problems.Debugging Mobile User VPN1 From Policy Manager, click Network => Remote User VPN.The Remote User setup window appears with the Mobile User VPN tab selected.2 Click Logging.The IPSec Logging dialog box appears.3 Click the logging options you want to activate.For a description of each option, right-click it, and then click What’s This?.4 Click OK.Debugging Remote User VPN (PPTP)1 From Policy Manager, click Network => Remote User VPN.The Remote User setup window appears with the Mobile User VPN tab selected.2 Select the PPTP tab.3 Click Logging.The PPTP Logging dialog box appears.4 Click the logging options you want to activate.For a description of each option, right-click it, and then click What’s This?.5 Click OK.140