WatchGuard Firebox System 4.6 User Guide

HostWatch6 To change playback properties, select View => Play Back Controls.7 Type or use the scroll control to change the Sample Time Size interval.8 Use the slide bar to select a midpoint within the log file to begin playback.9 Click OK.Controlling the HostWatch displayYou can selectively control the HostWatch display. This feature can be useful formonitoring the activities of specific hosts, ports, or users.Viewing specific hostsFrom HostWatch:1 Select View => Filters.2 Click the Inside Hosts or Outside Hosts tab.3 Clear the Display All Hosts checkbox.4 In the New Host field, enter the IP address of the host to watch. Click Add.Repeat for each host that HostWatch should monitor.5 Click OK.Viewing specific portsFrom HostWatch:1 Select View => Filters.2 Click the Ports tab.3 Clear the Display All Ports checkbox.4 In the New Port field, enter the port number to monitor. Click Add.Repeat for each port that HostWatch should monitor.5 Click OK.Viewing authenticated usersFrom HostWatch:1 Select View => Filters.2 Click the Authenticated Users tab.3 Clear the Display All Authenticated Users checkbox.4 In the New User field, enter the user ID of the authenticated user to watch. ClickAdd.Repeat for each authenticated user that HostWatch should monitor.Inside hosts and authenticated users are displayed even if there are noconnections for them.5 Click OK.100