Series MS - SMC
Series MS - SMC
Series MS - SMC
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Miniature FittingsStainless Steel 316<strong>Series</strong> <strong>MS</strong>Applicable Tubes: ø3.2, ø4, ø6 Connection Thread: M5, R 1/8For use in corrosive environmentsStainless steel 316Compact piping spaceTube has a large retaining force. Hosenipple assures easy installation andremoval.Line up various typesPossible for special tubing in the samedirection. Accepts many styles of plastictubingHose nipple and hose elbowAccepts nylon, soft nylon, and polyurethanetubing.Hose nippleBarbConfiguration for easyinsertion into the tubeHolds the tube tightly.BodyStainless steel 316GasketLow tightening torqueTight sealTubePossible forcombination use ofnylon tubing andpolyurethane tubing.Cap nutCertainly hold the tubeby manual clampingEasy removal of tubeby looseningStailess steel 316Barb fittingBarbConfiguration for easyinsertion into the tubeHolds the tube tightly.TubeMade to Order(Refer to page 266 for details.)BodyStainless steel 316GasketLow tighteningtorqueTight sealSpecificationsApplicable tubing materialApplicable tubing O.D./I.D.FluidMaximum operating pressure (at 20°C)Ambient and fluid temperatureConnection sizeThreadNylon Soft nylon (1) Polyurethaneø4/ø2.5ø6/ø4ø3.18/ø2.18ø4/ø2.5ø6/ø4ø3.18/ø2ø4/ø2.5ø6/ø4FEP (2)ø4/ø2.5ø6/ø4Modified PTFE (3)ø4/ø2.5ø6/ø4Air/Water (4)1.5MPa 1MPa 0.8MPa 1.5MPa 1.4MPa–5 to 60°C (Water: 0 to 60°C) (No freezing)M5, R1/8M5JIS B0205 (Metric fine thread)JIS B0205,JIS B0203 (Taper thread for piping) (Metric fine thread)Note 1) Soft nylon tubing is not compatible with water.Note 2) , Note 3) Applicable only for hose nipple typeNote 4) Barb fitting, barb elbow and barb tee are not compatible with water.262Principal Parts MaterialMaterialBodyGasketStainless steel 316PVC, Nylon 66, GF30%
Miniature Fittings Stainless Miniature Steel Fittings 316 <strong>Series</strong> MBModelModel Description Application Note Model Description Application Note<strong>MS</strong>-5AU-3<strong>MS</strong>-5AU-4<strong>MS</strong>-5AU-6P.264Barb elbow forsoft tube<strong>MS</strong>-5ALHU-3<strong>MS</strong>-5ALHU-4<strong>MS</strong>-5ALHU-6<strong>MS</strong>-5H-4<strong>MS</strong>-5H-6<strong>MS</strong>-5HLH-4<strong>MS</strong>-5HLH-6Barb fittingfor soft tubeP.264Hose nippleP.264Hose elbowP.264For soft nylon tubeFor polyurethane tubeFor soft nylon andpolyurethane tubeFor softnylon tubeForpolyurethanetubeFor soft nylonandpolyurethanetubeBody rotates at 360° around the stud axisFor nylon, soft nylon,andpolyurethane tube• For nylon, softnylon, andpolyurethane tube• Body rotates at360° around thestud axisø3.18/ø2.18x M5ø3.18/ø2 x M5ø4/ø2.5 x M5ø6/ø4 x M5ø3.18/ø2.18x M5ø3.18/ø2 x M5ø4/ø2.5 x M5ø6/ø4 x M5ø4/ø2.5 x M5ø6/ø4 x M5ø4/ø2.5 x M5ø6/ø4 x M5<strong>MS</strong>-5UL<strong>MS</strong>-5UT<strong>MS</strong>-5B<strong>MS</strong>-5P<strong>MS</strong>-5J<strong>MS</strong>-5N<strong>MS</strong>-5UN<strong>MS</strong>-5ATHU-3<strong>MS</strong>-5ATHU-4<strong>MS</strong>-5ATHU-6UniversalelbowP.264UniversalteeP.264PushP.265PlugP.265Extention fittingP.265NippleP.265Universal nippleP.265Barb tee forsoft tubeP.265Body rotates at 360°around the stud axisBody rotates at 360°around the stud axisFor reducing Rc 1/8female to M5 femaleUse to plug unusedM5 port.Solid piece movesfitting up from workpieceFitting to workpieceand fitting to fittingconnectionBody rotates at 360°around the stud axisFor softnylon tubepolyurethanetubeForsoft nylonandpolyurethanetubeBody rotates at 360° around the stud axisM5 femalex M5 maleM5 femalex M5 femalex M5 maleR 1/8x M5 femaleM5 malex M5 femaleM5 malex M5 maleM5 malex M5 maleø3.18/ø2.18x M5ø3.18/ø2 x M5ø4/ø2.5 x M5ø6/ø4 x M5KMHKKD<strong>MS</strong>LQMQRT263
<strong>Series</strong> <strong>MS</strong>Barb Fitting for Soft Tube: <strong>MS</strong>-5AU-3/4/6Model C øD LEffective area Mass(mm 2 ) (g)<strong>MS</strong>-5AU-3<strong>MS</strong>-5AU-44.551.61.811.5121.72.11.41.5<strong>MS</strong>-5AU-6 7 2.5 14 4.0 1.7Width across flats 7Barb Elbow for Soft Nylon: <strong>MS</strong>-5ALHU-3/4/6Model A C øD LEffective area Mass(mm 2 ) (g)<strong>MS</strong>-5ALHU-3<strong>MS</strong>-5ALHU-488.84.551.61.811.812.61.11.433.1<strong>MS</strong>-5ALHU-6 10.8 7 2.5 14.6 2.4 3.7<strong>MS</strong>-5ALHU-3, -4Width across flats 7<strong>MS</strong>-5ALHU-6Width across flats 7Hose Nipple: <strong>MS</strong>-5H-4/6Model<strong>MS</strong>-5H-4<strong>MS</strong>-5H-6B78øD1.82.5L15.516.5E78øF6.58.5Effective area(mm 2 )2.14.0Mass(g)2.53.7Width across flats BHose Elbow: <strong>MS</strong>-5HLH-4/6Model<strong>MS</strong>-5HLH-4<strong>MS</strong>-5HLH-6A1213.5B78C8.59.5øD1.82.5E78øF6.58.5L15.817.8M1516N5.56Effective area(mm 2 )1.42.5Mass(g)4.26.2Width across flats 7øUniversal Elbow: <strong>MS</strong>-5ULUniversal Tee: <strong>MS</strong>-5UTWidth across flats 7Width across flats 7Effective area: 2.4 mm 2Mass: 4.5 gEffective area: 2.4 mm 2Mass: 4.5 g264
Miniature Fittings <strong>Series</strong> <strong>MS</strong>Bushing: <strong>MS</strong>-5BPlug: <strong>MS</strong>-5PWidth acrossflats 10Width acrossflats 7Extension Fitting: <strong>MS</strong>-5JEffective area: 12 mm 2Mass: 5.5 gWidth across flats 7Nipple: <strong>MS</strong>-5NMass: 1.2 gKMHKKEffective area: 4.0 mm 2Mass: 3.4 gBarb Tee for Soft Tube: <strong>MS</strong>-5ATHU-3/4/6Model A1 A2 C øDEffective area Mass(mm 2 ) (g)<strong>MS</strong>-5ATHU-3<strong>MS</strong>-5ATHU-488.88.38.84.551.61.81.11.43.43.6<strong>MS</strong>-5ATHU-6 10.8 10.8 7 2.5 2.4 4.2Effective area: 4.0 mm 2Mass: 1.4 gWidth across flats 7D<strong>MS</strong>LQMQRT<strong>MS</strong>-5ATHU-3, -4Width across flats 7<strong>MS</strong>-5ATHU-6Width across flats 7Universal Nipple: <strong>MS</strong>-5UNWidth acrossflats 8Width acrossflats 8Effective area: 4.0 mm 2Mass: 3.7 g265
<strong>Series</strong> <strong>MS</strong>Made to Order SpecificationsPlease contact <strong>SMC</strong> for detailed dimensions, specifications, and delivery.1Gasket Material ModificationSymbolX83X112Suffix “-X83” to the end of part number.Example) <strong>MS</strong>-5AU-4-X83SpecificationsGasket material: Stainless steel 304, NBRApplicable threadM5Applicable threadM5Gasket part no.M-5G2Gasket material: Stainless steel 316, Special FKMGasket part no.M-5G3Spare PartsDescriptionGasketPart no.M-5G1M-5G2M-5G3M-5GHApplicable threadM5MaterialPVCStainless steel 304, NBRStainless steel 316, Special FKMNylon 66, GF30%Applicable model———<strong>MS</strong>-5ALHU-6<strong>MS</strong>-5HLH-4<strong>MS</strong>-5HLH-6<strong>MS</strong>-5ATHU-6Cap nut<strong>MS</strong>-5-4-P01<strong>MS</strong>-5-6-P02——Stainless steel 316Stainless steel 316<strong>MS</strong>-5H-4<strong>MS</strong>-5HL-4<strong>MS</strong>-5HLH-4<strong>MS</strong>-5H-6<strong>MS</strong>-5HL-6<strong>MS</strong>-5HLH-6PrecautionsBe sure to read before handling.Refer to front matters 58 and 59 for Safety Instructions and pages 13 to 16 for Fittings and TubingPrecautions.Tightening of M5 ThreadCaution1. Tighten by hand, and give it an additional rotation with awrench.Please check the number of tightening revolutions using thetable below. If tightened excessively, thread portion may bedamaged and gasket may be deformed. This will cause airleakage. On the contrary, if tightened insufficiently, threadmay loosen causing air leakage.ThreadM5Model<strong>MS</strong>-5AU-<strong>MS</strong>-5H-<strong>MS</strong>-5P<strong>MS</strong>-5J<strong>MS</strong>-5N<strong>MS</strong>-5UN<strong>MS</strong>-5ALHU-6<strong>MS</strong>-5HLH-<strong>MS</strong>-5ATHU-6<strong>MS</strong>-5ALHU-3, 4<strong>MS</strong>-5UL<strong>MS</strong>-5UT<strong>MS</strong>-5ATHU-3, 4Number of tightening rotationsApprox. 1/6 to 1/4 rotation Note)Approx. 1/2 rotation Note)Note) As a guideline, the tightening torque should be 1 to 1.5 N·m.266CautionUse of Tube with Hose Nipple1. Cut the tube perpendicularly to the tube axis to a little longerlength than required (use tube cutter “TK-1”, “TK-2” or “TK-3”).2. Pass the tube through the cap nut.3. Push the tube until it comes to the end of the barb portion, or itmay cause air leakage or hose releasing.4. Tighten the cap nut firmly by hand on the fitting.Use of Tube with Barb FittingCaution1. Cut the tube perpendicularly to the tube axis to a little longerlength than required (use tube cutter “TK-1”, “TK-2” or “TK-3”).2. Push the tube until it comes to the end of the barb portion, or itmay cause air leakage or release hose.
Change language